[Oct 18, 2022] Valid HPE6-A80 Test Answers & HPE6-A80 Exam PDF [Q17-Q39]

4/5 - (1 vote)

[Oct 18, 2022] Valid HPE6-A80 Test Answers & HPE6-A80 Exam PDF

Valid Aruba Certified Design Expert (ACDX) HPE6-A80 Dumps Ensure Your Passing

Q17. A customer has multiple medium and large branch sites, eacri of which requires between S ana 16 APs and supports between 200 and 600 wireless clients, Every branch site has an Internet connection, which it uses to reach the central data center. The customer would prefer the WAN links to be optimized in the solution.
Different use cases require SSID’s for tunneled traffic from remote sites to central location, traffic that must remain local on the remote site, and traffic which would need to egress out from remote site Internet connection.
Which branch office solution best meets the customer needs?

lAPs with Aruba central

RAPs and branch office controllers

IAPs with branch office controllers

CAPS and branch office controllers

Q18. in which scenario do Aruba CX 6400 Series switches, but not Aruba 6300M Series switches, meet the needs Tor a wired upgrade?

The customer requires switches in the same closet to operate together as a single switch for Link Aggregation but to be managed as separate devices.

The customer requires enhanced redundancy at the access layer and wants to ensure that each switch can continue to operate even if a power supply fails

The customer requires each access layer switch to support at least 25Gbps on its fiber uplinks at all times; including if up to one uplink tails.

The customer has recently deployed Aruba AP-535 APs and is concerned about a future-proof wired edge that will continue to support expanding bandwidth requirements.

Q19. A customer has critical wired endpoints. However, each endpoint has a single Ethernet connection to the network. The customer wants redundancy in the switch access layer to minimize the chances that an endpoint will lose this connection The architect plans to deploy two Aruba CX 6405 switches in the closet.
Which plan provides the greatest redundancy for this scenario?

The 6405 Switches are in a VSF fabric, so the individual switches do not need redundant components.

The 6405 switches are in a VSX fabric, and each has a redundant management module but not a redundant power supply.

The 6405 switches are not in a vsF fabric, and have redundant power supplies but not redundant management modules.

The 6405 switches are not in a VSX fabric, and have redundant power supplies and redundant management modules.

Q20. A hospital needs a Getter way to track its inventory Including wireless medical devices that are moved around the site a lot.
Which solution meets these needs?

Aruba asset tags and beacons

Aruba beacons. APs. and AirWave

Aruba beacons and Meridian

Aruba asset tags, APs; and Meridian

Q21. What is one benefit that Airwave provides to customers in the 8.x OS network?

profiling of wired and wireless client behavior and detection when the behavior varies from the baseline

in-depth analytics oT mobile device presence and APIs to make this data available to other applications

a central UI from which to manage all of the Mobility Controllers (MCs)

ability to monitor the status and operation of the complete network over time

Q22. A customer requires new MCs for a large multi-site network with about 600 AP-535S ana 30,000 wireless clients. The customer requires redundancy for the MCs, with each MC being able to handle the full toad in a failover situation The network should be able to sustain the loss of a controller with stateful failover within seconds. It should be able to undergo software upgrades without downtime.
The architect has recommended two 7240XM MCs. The customer points out that 7220 MCs can support their requirements and wonders why the architect recommended me 7240XMS.
What should the architect explain?

The 7240XM MCs have better redundant power supplies and fan tray component capabilities than 7220 MCs.

The 724QXM MCs can support full CPSec tunnels with this number of APs. while the 7220 MCs cannot.

The 7240XM MCS provide a higher number of concurrent GRE tunnels to support 600APs with MCS in L2 clustering.

The 7240XM MCs are required to support the large number of wireless clients in this network

Q23. Refer to the exhibit.

The exhibit shows the design for an existing network. The customer intends to replace the current Core switches with two Aruba 8400 switches.
What are two points that the architect should ensure that the customer understands? (Select two.)

The 8400 switches do not support VSF.

The 8400 switches cannot be monitored by AirWave.

The 8400 switches run different software than the 5400R switches.

The 8400 switches have a smaller ARP table than the 540OR switches.

The 8400 switches are fixed port switches.

Q24. A customer has an existing; Aruba wireless solution to provide wireless access for employees. The solution Includes Aps, mobility controllers (MCs) at the network core, and a Mobility Master (MM} A customer would like to set up a separatelymanaged guest network and have the traffic go directly to the DMZ.
What should the architect suggest as the simplest solution that meets the requirements?

Have a dedicated mobility controller in the DMZ managed by the same MM

Double the number of APs and controllers.

Use MulitZone, and put a mobility controller in Itie DMZ.

Add APs in a dedicated AP group to support only the guest network SSID.

Q25. Refer to the exhibit.

This warehouse has the dimensions shown in the exhibit. The warehouse is 20 feet (6 m) high up to a steel railing on the celling. The shelves are about 16 feet (5m) high, and they hold large containers filled with fluid and metal equipment.
The customer needs consistent wireless coverage throughout the warehouse, mostly to support the tablets that employees use to run Inventory tracking and other applications. The warehouse staff works in shifts of 20.
The architect has selected AP-515S. About how many APs should the architect propose?

about 13-16

about 23-32

about 6-8

about 6-4

Q26. Refer to the exhibit.

A customer needs to support resilient wireless services
What is one way that this design helps to minimize me impact of a railed access layer switch on these services?

The switches support Smart Rate and dual home AP connections.

The 8400s and G405s use Virtual Switching Extension (VSX) in cone and access.

Each access layer switch has two redundant links to the core.

APS in the same area connect to different switches.

Q27. Refer to the exhibit.
A customer has an existing network with ArubaOS switches, Aruba 7205 controller, and 802.11ac APs. The customer needs a wired upgrade for their campus network and wireless upgrade with 802,11ax APs and would like to get all the functions of AP.
The customer has one building with 3 floors with the following wired devices,
* 200 VOIP phones
* 8 printers
* security cameras
The architect plans to propose 75 AP-535s.
The security cameras are a high definition pan-tilt-zoom with heaters for harsh environments that require more than 45 W to function, Which exhibit shows an access switch mat meets the customer needs?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

Q28. Refer to the exhibit.

A customer needs a wireless network upgrade and has these requirements.
– Support any applications used on a wired connection
– Support up to 2500 wireless clients
– Support seamless roaming from floor to floor and building to building
– Continue to function seamlessly if one controller fails
The architect has designed the logical infrastructure for the network as shown in the exhibit Which change should the architect make to belter meet customer requirements and besl practices?

Combine me /25 subnets for wireless and wired users into a /16 subnet.

Install additional Mobility Controller.

Combine the /25 subnets for wireless users into a /20 subnet

Place each controller in a different VLAN and subnet.

Q29. Refer to the exhibit.

A company needs a new wireless solution for its multi-site network. All branch sites must connect to the main site through secure tunnels over the Internet. The customer requires full redundancy for the Mobility Controllers (MC). Including stateful faiEoverand seamless roaming for the main site.
The architect plans to propose:
– 500 RAPS
– 100 APs at the main campus
– two 7205 MCs
– two 7210 MCS
– one MM appliance
The exhibit snows the existing wired network at the main site, which has a single building with two large floors.
Following the best-practices on design, performance and security, where should the architect plan to connect the MCs?
{Potential locations are numbered in the exhibit.)

two 7205 MCs at 2; two 7210 MCs at 1

one 7205 MC at 3 and one at 4; two 7210 MCs at 1

all of the MCs at 2

two 7205 MCS at 1; two 7210 MCS at 2

Q30. What is one reason to deploy an Aruba CX switch when compared to an ArubaOS switch?

to obtain API-enabled programmability for greater automation

to support Aruba Dynamic Segmentation

to obtain higher wattage power modules for enhanced PoE+ support

to support Zero Touch provisioning (ZTP)

Q31. For which scenario do Aruba CX 6300M Series switches meet the needs for an upgrade of the wired access layer while the Aruba CX 630QF Series switches do not?

The customer wants to utilize the Aruba AP-515 support for 002 3bz connectivity.

The customer wants to utilize LACP on AP515 in VSF switch configuration.

The Aruba CX6300M supports 10GBase-T connectivity with AP-515.

The Aruba CX 630DM support up to 75W PoE+ per port

Q32. Refer to the exhibit.

A customer needs a wired upgrade for a building on its main campus. The exhibit shows the switches that the architect has selected for each closet and me existing cabling. The customer is not open to changing the cabling.
The customer requires link redundancy for the uplinks from each closet and for the links from the building to the core. In non link failure situations, the uplinks from each closet must support at least 20Gbps, and the building as a whole must have at least 20 Gbps to the core in non link failure situations Which two options Tor connecting the closets to the network core are valid? (select two.)

Connect me Floor 2 switch stack to Floor 1 with two fiber connections, DO me same for Floor 3. connect the Floor 1 switch stack to the network cone with two fiber connections.

Connect the switch stack on each floor directly to the network cone on two “fiber connections per floor. Achieve this by patching the inter-floor fiber through to the inter-building fiber.

Combine the nine switches on the three floors into a single switch stack with the MM QM3 fiber cables in a ring topology. Connect two Floor 1 members to the network core with one fiber connection each.

Combine the nine switches on all three floors into a single switch slack with stacking cables in a ring topology.
Connect two Floor f members to the network core with one fiber connection each

Add two aggregation switches in the Floor 1closet. Connect the switch stack for each closet to the aggregation switches on two fiber links each and the aggregation switches to the core on two fiber links.

Q33. Which scenario Indicates the need for a wireless mesh?

A nsstorical building has some wired areas and a few areas with no wired or wireless connectivity, walls and ceilings have asbestos. The company needs wireless access across the site.

A hospital needs to provide high availability for wireless services in certain areas which support very critical wireless medical devices. Devices must always be in range of at least two APs.

A company has a small branch office with just one RAP. The company has noticed that performance is poor in some areas of the network and wants to add another AP.

A company needs to provide seamless roaming and wireless access between two buildings. The buildings are about 60 feet (18 m) apart.

Q34. A retailer wants to add a wireless network to its stores to provide guest access. The store has wired POS systems which the customer will now replace with wireless systems.
What is one Important security action that the wireless solution supports to comply with PCI DSS?

Use test-practice, factory default settings for security settings and login credentials.

Implement TKIP encryption on the wireless network used by POS devices.

Impose mandatory clean up periods to delete records of user access to controllers

Enforce role-based access control on administrators who access controllers

Q35. Refer to the exhibit.

The exhibit shows the current AP deployment In a warehouse that stores frozen food goods:
* APs are mounted on the ceiling, which is 15 feet (4.6 m) high.
* Shelves are 12 feet (3.7 m) high and are typically fully stocked.
This customer indicates that their current wireless performance is inadequate.
What should the network architect include in the new solution to resolve this issue?

APS deployed on the ceiling in the same current locations, out with dual 5GHz radios

APs deployed on the ceiling in each aisle, due to the high absorption between aisles

APs deployed with directional antennas on the ceiling, due to the high 15-foot callings

APs deployed with directional antennas and a hybrid wall-mount, ceiling-mount design

Q36. Refer to the exhibit.

A customer requires a core switching solution for a very large multi-building campus with about 30;ooo wireless clients and devices. The network will have a flat topology as shown in the exhibit, and MCs will forward all wireless traffic to the core for routing.
The customer had considered Aruba 5400R Series switches, but the architect recommends Aruba S320 switches Instead.
How should the architect justify this recommendation?

The 8320 switches are required to eliminate the aggregation layer as the customer desires.

The 3320 switches offer more extensive mobility integration features with Aruba MCs and APs than the 54C0R Series switches do.

The 3320 switches support a higher density of 10GbE fiber ports than the 5400R Series.

The 8320 switches have greater performance and larger ARP tables than the 54Q0R Series, as is necessary for a network this size.

Q37. A retailer currently has two redundant ClearPass C2000 0L36O Gen9 hardware appliances and two perpetual 1K Access licenses. The customer uses ClearPass to authenticate employee wireless devices and other corporate wireless devices. ClearPass togs indicate that, peak license usage is currently 1900.
The customer now wants to add a guest access solution. Guests will connect to an open SSiD and be redirected to a portal which they can use to self-register and log in. The customer anticipates that up to f 550 guest devices will connect at the same time.
The customer requires the most cost-effective solution that will meet the requirements. What should the network architect recommend for this solution?

IK + 500 Access licenses: IK + 500 Guest licenses

1K + 500 Access licenses; Two 1K Onboard licenses

1K + 500 Access licenses

Two 1K Guest licenses

Q38. A mall requires a wireless network upgrade to 802 -Max The company that owns the mall wants to provide the APs for the entire mall. However, several of the larger national chain retailers with spaces in the mall want to offer wireless services with their own SSIDs.
These individual retailers also have their own wireless guest services and wireless client devices They have their own corporate infrastructure and want to handle all of this wireless traffic on their own, including terminating the traffic on their own controllers. The mall requires redundancy for its services, out the retailers do not.
Which plan for mobility controllers (MCs) and mobility master (MW) meets the needs of this scenario?

a pair of MMs for the mall company, but not MCs: MMs control one MC for each retailer with its own SSIDs

two MCs for the mall company and for all of the retailers, both controlled by the same pair of MMs

two MCs for the mail company controlled by a pair of MMS; one standalone MC for each retailer with its own SSIDS

two MCs for the mall company and one MC for each retailer with its own SSIDs, all controlled by the same pair of MMs

Q39. An archinect needs lo plan a Mobility Master (MM) solution for a customer Requirements include:
* redundancy for the MM
* redundancy for the MCS (seamless failover if up to one fails)
The wireless network consists of
* total APs – 300
* total wireless devices = 20,000
* total MCs = 10
The customer wants the most cost-effective plan that meets me requirements.
Which plan for MMs should the architect select?

1 MM-HW-5K and 1 MM-VA-1K

2 MM-HW-5K

1 MM-HW-5K and 1 MM-HW-1K

2 MM-HW-1QK

HPE6-A80 Dumps Real Exam Questions Test Engine Dumps Training: https://www.dumpstorrent.com/HPE6-A80-exam-dumps-torrent.html

[Oct 18, 2022] Valid HPE6-A80 Test Answers & HPE6-A80 Exam PDF [Q17-Q39]

admin

Leave a Reply Cancel reply