[May 03, 2023] Latest Questions OMS-435 Guide to Prepare Free Practice Tests [Q46-Q67]

Rate this post

[May 03, 2023] Latest Questions OMS-435 Guide to Prepare Free Practice Tests

Reliable OMS-435 Dumps Questions Available as Web-Based Practice Test Engine

Q46. A developer creates a FlexCard with five state elements. For of the states have a condition. To test the FlexCard, the developer previews it using sample data that causes two of the states to have true conditions.
In this scenario, how will the developer know which state will display?

The first state with true conditions sequence closest to the top of the FlexCard canvas will display.

The first state with true nested condition, regardless of sequence in the FlexCard canvas, will display

The state sequenced first in the FlexCard canvas will display.

The first state with a true AND condition, regardless of sequence in the FlexCard canvas, will display.

Q47. A developer is configuring a DataRaptor Load to Save contract data. The developer needs to set the record type of the contact using DeveloperName.
Which two configuration actions should the developer take to set this up in the DataRaptor Load?

Check is Lookup property when mapping the fields.

Add Link to RecordType object in the Contact Object with the id field of RecordType object.

Select RecordType in the Lookup object list. Development in the lookup Field list, and ID in the Lookup Requested Field list.

Select RecordType in the Lookup Object list. ID in the Lookup Field list, and Development in the Lookup requested Field list.

Q48. A developer is configuring a DataRaptor Load to Save contract dat
a. The developer needs to set the record type of the contact using DeveloperName.
Which two configuration actions should the developer take to set this up in the DataRaptor Load?

Check is Lookup property when mapping the fields.

Add Link to RecordType object in the Contact Object with the id field of RecordType object.

Select RecordType in the Lookup object list. Development in the lookup Field list, and ID in the Lookup Requested Field list.

Select RecordType in the Lookup Object list. ID in the Lookup Field list, and Development in the Lookup requested Field list.

Q49. A developer creates an Integration Procedure with a Set values and a DataRaptor Extract Action that requires Accountld as a key. When the developer previews the Integration Procedure, the developer enters the Accountld correctly and executes the preview. The developer sees the data extracted by the DataRaptor in the Debug Log, but the response is empty.
What is the likely cause of this issue?

The Response cannot be previewed directly.

The DataRaptor Action did not have the Add Response To Response JSON property set to true.

A Response Action was not added to the Integration Procedure.

The Accountld used for the preview is invalid.

Q50. Refer to the exhibit.

All inputs to the Calculation Matric are set correctly.
The Calculation Matrix has the following input:

What is the output?

Null

13.99

12.99,13.99

12.99

Q51. A developer is configuring the API URL in an HTTP Action element within an Integration procedure.
What is the merge code syntax for passing a Date node from an element named SetValues in the URL?

x%SetValues.Date%

(‘ Setvalues’] [ ‘Date’]

%SetValues Date

{(SetValues. Date)}

Q52. An integration Procedure uses an HTTP action to make a REST API call. The response from the REST API must be converted into a specific XML structure before sending it as an input to another external wen service.
How should the developer configure the Integration Procedure to meet this requirement?

Use a Remote Action that calls the XMLStreamReader class

Use a Remote Action that calls the XMLStreamWriter class

Use a DataRaptor Transform to convert JSON to XML

Use a DataRaptor Extract and check the XML checkbox on the Output JSON Path.

Q53. A customer sets up two LWC OmniScripts, one embedded into another. AccountId is set in a Set Values element in the parent OmniScript. The Accountid set in the parent OmniScript is used to set another Set values element ContextAccountId in the emvedded OmniScript. The embedded OmniScript is activated.
While previewing the OmniScript flow from the parent, it is found that Account I set correct in the parent OmniScript. However ContextAccount in the embedded OmniScript is not set with the Accountid from parent OmniScript. On previewing the embedded OmniScript individually. It is found that ContextAccountId is set correctly.
What is the reason for this? Refer to the exhibit below.

The WLC PubSub Messge flag in the Set Values action of the parent OmniScript has not been set.

The flag passData.JSON in the parent OmniScript in not configured correctly.

A developer failed to include a Navigate Action Element to pass data from the parent OmniScript.

Both parent and embedded OmniScripts have the same element name for the Set Values element.

Q54. A developer is building an OmniScript and needs to retrieve data from a single field in a Salesforce record.
Which OmniScript element does this?

Lookup

Select

HTTP Action

DataRaptor Post Action

Q55. Refer to the exhibit below. In this integration production structure, what Send JSON Path would be used to send the Output of the Action1 element to a Remote Action?

Action1. BlockB. Block A

Action1: BlockB. Block A

BlockA: BlockB. Action 1

BlockB: BlockB. Action1

Q56. Refer to the exhibit.

A developer creates an OmniScript display FirstName, LastName, and BirthDate of a contact using a Type Ahead Block. The DataRaptor used in the Type Ahead has been tested and fetches the correct data.
When previewing Omniscript, the developer enters a name in the Type Ahead and males a selection of a contact from the list. However, the text fields FirstName. LastName, and BirthDate are not getting populated with the data.
What is the reason that the fields fail to display the fetched data?

Lookup Mode is not selected in the properties of the Type A Head Block.

Use Data JSON is not selected in the properties of the Type Ahead Block.

FirstName, LastName, and BirthDate are not placed inside the Type ahead Block.

The Typeghead ley is not in the correct format

Q57. Which two fields in an Integration Procedure can use a function like CONCAT or DATEDIFF?
Choose 2 answers

In Procedure Configuration, in a Tracking Custom Data value field.

In a Remote Action, in a Remote Options value field.

In a Remote Action, in an Additional Output value field.

In a Response Action, in an Additional input value field.

Q58. A developer is creating an OmniScript that Provisions trial orgs to their customers. The following text block in the OmniScript uses a merge code to display the ID for the new trial org:
Welcome to Salesforce
Your ID is %Details: Customer10:ID%
During testing, the developer notices that the ID does not display. The data JSON is structured as shown below.
How should the developer correct the merge code in order for the ID to display?

To %%Details:Customer|0:ID%%

To %%Details:Customer|n:ID%

To %%Details:Customer|1:ID%

To $Details:Customer|0:ID$

Q59. A developer creates a DataRaptor Extract to retrieve data to pass to an external service. The external service expects the field value to be integer. However, the DataRaptor is sending it as a string.
Which action can the developer take to fix this?

In the DataRaptor Output tab, select the Output Data Type of that field to Integer.

In the DataRaptor Output tab, enter the default value as 0 on the field.

In the DataRaptor Extract tab, set the Input Data Type field to Integer.

In the DataRaptor Formula tab, define a formula using the function TOINTEGER and use the formula as output.

Q60. A developer needs to change some field labels on a FlexCard. The FlexCard is currently deployed to production. The developer that the best course of action is to version the FlexCard rather than cloning it.
Which factor would lead the developer to this decision?

The new version of the FlexCard will be used in a new Console, and the current version of the FlexCard should remain unchanged.

Another team member is developing new action, fields and styling for the current version of the FlexCard.

The new and current versions will be displayed together on the same target.

All instance of the FlexCard must be updated with the changes.

Q61. Why would a developer clone an Integration Procedure instead of versioning it?

The new Integration Procedure uses a Cache Block.

The new Integration Procedure it replacing stub data.

The new Integration Procedure will be used independently

The new Integration Procedure is Chainable.

Q62. A developer is troubleshooting an Integration Procedure with two elements: A Remote Action named FetchCart and a Response Action named ResponseCart.
In Preview, what JSON node shows the data sent to the Response Action?

FetchCart

Response

ResponseCartDebug

ResponseCart

Q63. In a calculation procedure, what is required for the output of a calculation step to be used in an aggregation step?

It must be included in constants.

It must be a matrix lookup step.

It must be a calculation step.

It must be included m the calculation output.

Q64. A developer need to use the CONTIF function to process data entered by the user in an OmniScript. The output of the function needs to be displayed to the user immediately in the current step.
Based on best practice, what element should the developer use this function in?

A Calculation Action element

A Set Values element

A formula element

A Range element

Q65. A developer needs to display the following information together on one FlexCard:
* Account name, address, phone number, website
* Primary contact first name, contact name, address, phone number, email The account information must always be visible, and the contact information should only be visible as needed by the user.
What approach should the developer use to display the contact information on the card?

Use a Datatable element

Set the class” collapsible” on the block element

Set the collapsible property on the block element

Use a conditional FlexCard State

Q66. Refer to the following row-versioned calculation matrix.

The developer needs to delete the row that contains the Code CA-SF.
If the developer deletes that row in Version 3, what is the result?

The row is delete only in Version 3.

The row is deleted In Versions 2 and 3 but will remain in Version 1.

The row is deleted in Version 3 and Version 1.

The row is deleted in all versions

Q67. A company wants to allow agents to send customers a quote for signature. The quote is a documents created using a DocuSign template that has been prefilled with all of the quote details. The document will be emailed to one or more recipients for signature.
How should a developer configure this functionality in an OmniScript?

DocuSign Envelope Action

PDF Acwm

DocuSign Signature Action

Email Action

Correct and Up-to-date Salesforce OMS-435 BrainDumps: https://www.dumpstorrent.com/OMS-435-exam-dumps-torrent.html

[May 03, 2023] Latest Questions OMS-435 Guide to Prepare Free Practice Tests [Q46-Q67]

admin

Leave a Reply Cancel reply