Latest JN0-664 Exam Dumps Juniper Exam from Training Expert DumpsTorrent [Q31-Q55]

Rate this post

Latest JN0-664 Exam Dumps Juniper Exam from Training Expert DumpsTorrent

Pass Juniper Service Provider, Professional (JNCIP-SP) PDF Dumps | Recently Updated 67 Questions

Juniper JN0-664 Certification Exam is a professional-level certification designed for individuals who are interested in pursuing a career in the service provider industry. Service Provider, Professional (JNCIP-SP) certification is designed to validate the skills and knowledge required to configure, troubleshoot, and maintain Juniper Networks’ service provider routing and switching platforms.

NEW QUESTION 31
Which origin code is preferred by BGP?

External

Null

Incomplete

Internal

NEW QUESTION 32
Exhibit

Which two statements about the configuration shown in the exhibit are correct? (Choose two.)

This VPN connects customer sites that use different AS numbers.

This VPN connects customer sites that use the same AS number

A Layer 2 VPN is configured.

A Layer 3 VPN is configured.

NEW QUESTION 33
Exhibit.

Referring to the exhibit; the 10.0.0.0/24 EBGP route is received on R5; however, the route is being hidden.
What are two solutions that will solve this problem? (Choose two.)

On R4, create a policy to change the BGP next hop to itself and apply it to IBGP as an export policy

Add the external interface prefix to the IGP routing tables

Add the internal interface prefix to the BGP routing tables.

On R4, create a policy to change the BGP next hop to 172.16.1.1 and apply it to IBGP as an export policy

NEW QUESTION 34
Which two statements are correct about VPLS tunnels? (Choose two.)

LDP-signaled VPLS tunnels only support control bit 0.

LDP-signaled VPLS tunnels use auto-discovery to provision sites

BGP-signaled VPLS tunnels can use either RSVP or LDP between the PE routers.

BGP-signaled VPLS tunnels require manual provisioning of sites.

NEW QUESTION 35
Exhibit

You must ensure that the VPN backbone is preferred over the back door intra-area link as long as the VPN is available. Referring to the exhibit, which action will accomplish this task?

Configure an import routing policy on the CE routers that rejects OSPF routes learned on the backup intra-area link.

Enable OSPF traffic-engineering.

Configure the OSPF metric on the backup intra-area link that is higher than the L3VPN link.

Create an OSPF sham link between the PE routers.

NEW QUESTION 36
Your organization manages a Layer 3 VPN for multiple customers To support advanced route than one BGP community on advertised VPN routes to remote PE routers.
Which routing-instance configuration parameter would support this requirement?

vrf-export

vrf-import

vrf-target export

vrf-target import

NEW QUESTION 37
In IS-IS, which two statements are correct about the designated intermediate system (DIS) on a multi-access network segment? (Choose two)

A router with a priority of 10 wins the DIS election over a router with a priority of 1.

A router with a priority of 1 wins the DIS election over a router with a priority of 10.

On the multi-access network, each router forms an adjacency to every other router on the segment

On the multi-access network, each router only forms an adjacency to the DIS.

NEW QUESTION 38
Exhibit

R4 is directly connected to both RPs (R2 and R3) R4 is currently sending all ,o,ns upstream to R3 but you want all joins to go to R2 instead Referring to the exhibit, which configuration change will solve this issue?

Change the bootstrap priority on R2 to be higher than R3

Change the default route in inet.2 on R4 from R3 as the next hop to R2

Change the local address on R2 to be higher than R3.

Change the group-range to be more specific on R2 than R3.

NEW QUESTION 39
Exhibit

Referring to the exhibit, which statement is true?

The 10.101.1.0/24 route will be shared if the vrf-table-label parameter is configured.

The 10.101.1.0/24 route will only be shared if BGP is configured in the routing instance

The 10.101.1 0/24 route will be shared if there are other VRFs that use the same route target community

The 10.101.1.0/24 route will be shared if the auto-export parameter is configured

NEW QUESTION 40
Which two statements are correct about reflecting inet-vpn unicast prefixes in BGP route reflection? (Choose two.)

Route reflectors do not change any existing BGP attributes by default when advertising routes.

A BGP peer does not require any configuration changes to become a route reflector client.

Clients add their originator ID when advertising routes to their route reflector

Route reflectors add their cluster ID to the AS path when readvertising client routes.

NEW QUESTION 41
Exhibit

Referring to the exhibit, PE-1 and PE-2 are getting route updates for VPN-B when neither of them service that VPN Which two actions would optimize this process? (Choose two.)

Configure the family route-target statement on the PEs.

Configure the family route-target statement on the RR

Configure the resolution rib bgp . 13vpn . 0 resolution-ribs inet. 0 Statement on the PEs.

Configure the resolution rib bgp.l3vpn.O resolution-ribs inet. 0 Statement on the RR

NEW QUESTION 42
Exhibit

Which two statements are true about the OSPF adjacency displayed in the exhibit? (Choose two.)

There is a mismatch in the hello interval parameter between routers R1 and R2

There is a mismatch in the dead interval parameter between routers R1 and R2.

There is a mismatch in the OSPF hold timer parameter between routers R1 and R2.

There is a mismatch in the poll interval parameter between routers R1 and R2.

NEW QUESTION 43
Exhibit

The network shown in the exhibit is based on IS-IS
Which statement is correct in this scenario?

The NSEL byte for Area 0001 is 00.

The area address is two bytes.

The routers are using unnumbered interfaces

The system IDofR1_2 is 192.168.16.1

NEW QUESTION 44
Exhibit

CE-1 and CE-2 are part of a VPLS called Customer1 No connectivity exists between CE-1 and CE-2. In the process of troubleshooting, you notice PE-1 is not learning any routes for this VPLS from PE-2, and PE-2 is not learning any routes for this VPLS from PE-1.

The route target must match on PE-1 and PE-2.

The route distinguisher must match on PE-1 and PE-2.

The instance type should be changed to I2vpn.

The no-tunnel-services statement should be deleted on both PEs.

NEW QUESTION 45
Which two statements are correct about a sham link? (Choose two.)

It creates an OSPF multihop neighborship between two PE routers.

It creates a BGP multihop neighborship between two PE routers.

The PEs exchange Type 1 OSPF LSAs instead of Type 3 OSPF LSAs for the L3VPN routes

The PEs exchange Type 3 OSPF LSAs instead of Type 1 OSPF LSAs for the L3VPN routes.

NEW QUESTION 46
When building an interprovider VPN, you notice on the PE router that you have hidden routes which are received from your BGP peer with family inet labeled-unica3t configured.
Which parameter must you configure to solve this problem?

Under the family inet labeled-unicast hierarchy, add the explicit null parameter.

Under the protocols ospf hierarchy, add the traffic-engineering parameter.

Under the family inet labeled-unicast hierarchy, add the resolve-vpn parameter.

Under the protocols mpls hierarchy, add the traffic-engineering parameter

NEW QUESTION 47
Exhibit

A network is using IS-IS for routing.
In this scenario, why are there two TLVs shown in the exhibit?

There are both narrow and wide metric devices in the topology

The interface specified a metric of 100 for L2.

Wide metrics have specifically been requested

Both IPv4 and IPv6 are being used in the topology

NEW QUESTION 48
You are a network architect for a service provider and want to offer Layer 2 services to your customers You want to use EVPN for Layer 2 services in your existing MPLS network.
Which two statements are correct in this scenario? (Choose two.)

Segment routing must be configured on all PE routers.

VXLAN must be configured on all PE routers.

EVPN uses Type 2 routes to advertise MAC address and IP address pairs learned using ARP snooping

EVPN uses Type 3 routes to join a multicast tree to flood traffic.

NEW QUESTION 49
You are responding to an RFP for a new MPLS VPN implementation. The solution must use LDP for signaling and support Layer 2 connectivity without using BGP The solution must be scalable and support multiple VPN connections over a single MPLS LSP The customer wants to maintain all routing for their Private network In this scenario, which solution do you propose?

circuit cross-connect

BGP Layer 2 VPN

LDP Layer 2 circuit

translational cross-connect

NEW QUESTION 50
An interface is configured with a behavior aggregate classifier and a multifield classifier How will the packet be processed when received on this interface?

The packet will be discarded.

The packet will be processed by the BA classifier first, then the MF classifier.

The packet will be forwarded with no classification changes.

The packet will be processed by the MF classifier first, then the BA classifier.

Explanation
behavior aggregate (BA) classifiers and multifield (MF) classifiers are two types of classifiers that are used to assign packets to a forwarding class and a loss priority based on different criteria. The forwarding class determines the output queue for a packet. The loss priority is used by a scheduler to control packet discard during periods of congestion.
A BA classifier maps packets to a forwarding class and a loss priority based on a fixed-length field in the packet header, such as DSCP, IP precedence, MPLS EXP, or IEEE 802.1p CoS bits. A BA classifier is computationally efficient and suitable for core devices that handle high traffic volumes. A BA classifier is useful if the traffic comes from a trusted source and the CoS value in the packet header is trusted.
An MF classifier maps packets to a forwarding class and a loss priority based on multiple fields in the packet header, such as source address, destination address, protocol type, port number, or VLAN ID. An MF classifier is more flexible and granular than a BA classifier and can match packets based on complex filter rules. An MF classifier is suitable for edge devices that need to classify traffic from untrusted sources or rewrite packet headers.
You can configure both a BA classifier and an MF classifier on an interface. If you do this, the BA classification is performed first and then the MF classification. If the two classification results conflict, the MF classification result overrides the BA classification result.
Based on this information, we can infer the following statements:
* The packet will be discarded. This is not correct because the packet will not be discarded by the classifiers unless it matches a filter rule that specifies discard as an action. The classifiers only assign packets to a forwarding class and a loss priority based on their match criteria.
* The packet will be processed by the BA classifier first, then the MF classifier. This is correct because if both a BA classifier and an MF classifier are configured on an interface, the BA classification is performed first and then the MF classification. If they conflict, the MF classification result overrides the BA classification result.
* The packet will be forwarded with no classification changes. This is not correct because the packet will be classified by both the BA classifier and the MF classifier if they are configured on an interface. The final classification result will determine which output queue and which discard policy will be applied to the packet.
* The packet will be processed by the MF classifier first, then the BA classifier. This is not correct because if both a BA classifier and an MF classifier are configured on an interface, the BA classification is performed first and then the MF classification. If they conflict, the MF classification result overrides the BA classification result.

NEW QUESTION 51
Which three mechanisms are used by Junos platforms to evaluate incoming traffic for CoS purposes? (Choose three )

rewrite rules

behavior aggregate classifiers

traffic shapers

fixed classifiers

multifield classifiers

NEW QUESTION 52
Exhibit

You want to use both links between R1 and R2 Because of the bandwidth difference between the two links, you must ensure that the links are used as much as possible.
Which action will accomplish this goal?

Define a policy to tag routes with the appropriate bandwidth community.

Disable multipath.

Ensure that the metric-out parameter on the Gigabit Ethernet interface is higher than the 10 Gigibit Ethernet interface.

Enable per-prefix load balancing.

NEW QUESTION 53
Exhibit

Referring to the exhibit, you must provide Internet access for VPN-A using CE-1 as the hub CE.
Which two statements are correct in this situation? (Choose two.)

You must use RIB groups to leak routes between the inet. o and vpn-a. inet. o tables.

RIB groups are not needed to leak routes between the inet. 0 and VPN-A. inet. 0 tables,

Internet traffic from Site 2 takes the path of PE-2 -> PE-1 -> GW-1.

Internet traffic from Site 2 takes the path of PE-2 -> PE-1 -> CE-1 -> PE-1 -> GW-1.

NEW QUESTION 54
Exhibit

Referring to the exhibit, which three statements are correct about route 10 0 0.0/16 when using the default BGP advertisement rules’? (Choose three.)

R1 will prepend AS 65531 when advertising 10 0.0 0/16 to R2.

R1 will advertise 10.0.0.0/16 to R2 with 192 168 1 1 as the next hop.

R2 will advertise 10.0.0.0/16 to R3 with 192.168.1 1 as the next hop

R4 will advertise 10 0.0 0/16 to R6 with 172.16 1 1 as the next hop

R2 will advertise 10.0.0.0/16 to R4 with 172.16.1.1 as the next hop

NEW QUESTION 55
Exhibit

You are examining an L3VPN route that includes the information shown in the exhibit Which statement is correct in this scenario?

The information shows a Type 1 route distinguisher.

The information shows a Type 0 route distinguisher

The information shows a Type 2 route distinguisher.

The information shows a route target

Juniper JN0-664 (Service Provider, Professional (JNCIP-SP)) Certification Exam is a comprehensive test of a candidate’s knowledge, skills, and abilities in service provider routing and switching technologies. Service Provider, Professional (JNCIP-SP) certification is highly regarded in the industry and can greatly enhance an individual’s career prospects in the networking field.

Updated Test Engine to Practice JN0-664 Dumps & Practice Exam: https://www.dumpstorrent.com/JN0-664-exam-dumps-torrent.html

Latest JN0-664 Exam Dumps Juniper Exam from Training Expert DumpsTorrent [Q31-Q55]

admin

Leave a Reply Cancel reply