Latest [Oct 26, 2023] NSE6_FWF-6.4 Exam Questions – Valid NSE6_FWF-6.4 Dumps Pdf [Q20-Q38]

Rate this post

Latest [Oct 26, 2023] NSE6_FWF-6.4 Exam Questions – Valid NSE6_FWF-6.4 Dumps Pdf

NSE6_FWF-6.4 Practice Test Questions Answers Updated 37 Questions

The NSE6_FWF-6.4 certification exam covers a wide range of topics related to wireless LAN security, including network design, deployment, configuration, and troubleshooting. NSE6_FWF-6.4 exam also includes topics related to the latest wireless security technologies, such as Fortinet’s Secure Access Architecture and the FortiAP-S series of wireless access points. In addition, the exam covers topics related to the FortiGate and FortiWLC platforms, which are used to manage and secure wireless networks.

QUESTION 20
Refer to the exhibits.
Exhibit A

Exhibit B

A wireless network has been created to support a group of users in a specific area of a building. The wireless network is configured but users are unable to connect to it. The exhibits show the relevant controller configuration for the APs and the wireless network.
Which two configuration changes will resolve the issue? (Choose two.)

For both interfaces in the wtp-profile, configure set vaps to be “Authors”

Disable intra-vap-privacy for the Authors vap-wireless network

For both interfaces in the wtp-profile, configure vap-all to be manual

Increase the transmission power of the AP radio interfaces

QUESTION 21
Which of the following is a requirement to generate analytic reports using on-site FortiPresence deployment?

SQL services must be running

Two wireless APs must be sending data

DTLS encryption on wireless traffic must be turned off

Wireless network security must be set to open

QUESTION 22
A tunnel mode wireless network is configured on a FortiGate wireless controller.
Which task must be completed before the wireless network can be used?

The wireless network interface must be assigned a Layer 3 address

Security Fabric and HTTPS must be enabled on the wireless network interface

The wireless network to Internet firewall policy must be configured

The new network must be manually assigned to a FortiAP profile.

QUESTION 23
Six APs are located in a remotely based branch office and are managed by a centrally hosted FortiGate. Multiple wireless users frequently connect and roam between the APs in the remote office.
The network they connect to, is secured with WPA2-PSK. As currently configured, the WAN connection between the branch office and the centrally hosted FortiGate is unreliable.
Which configuration would enable the most reliable wireless connectivity for the remote clients?

Configure a tunnel mode wireless network and enable split tunneling to the local network

Configure a bridge mode wireless network and enable the Local standalone configuration option

Configure a bridge mode wireless network and enable the Local authentication configuration option

Install supported FortiAP and configure a bridge mode wireless network

QUESTION 24
When configuring Auto TX Power control on an AP radio, which two statements best describe how the radio responds? (Choose two.)

When the AP detects any other wireless signal stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.

When the AP detects PF Interference from an unknown source such as a cordless phone with a signal stronger that -70 dBm, it will increase its transmission power until it reaches the maximum configured TX power limit.

When the AP detects any wireless client signal weaker than -70 dBm, it will reduce its transmission power until it reaches the maximum configured TX power limit.

When the AP detects any interference from a trusted neighboring AP stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.

QUESTION 25
What type of design model does FortiPlanner use in wireless design project?

Architectural model

Predictive model

Analytical model

Integration model

QUESTION 26
As a network administrator, you are responsible for managing an enterprise secure wireless LAN. The controller is based in the United States, and you have been asked to deploy a number of managed APs in a remote office in Germany.
What is the correct way to ensure that the RF channels and transmission power limits are appropriately configured for the remote APs?

Configure the APs individually by overriding the settings in Managed FortiAPs

Configure the controller for the correct country code for Germany

Clone a suitable FortiAP profile and change the county code settings on the profile

Create a new FortiAP profile and change the county code settings on the profile

QUESTION 27
Which two configurations are compatible for Wireless Single Sign-On (WSSO)? (Choose two.)

A VAP configured for captive portal authentication

A VAP configured for WPA2 or 3 Enterprise

A VAP configured to authenticate locally on FortiGate

A VAP configured to authenticate using a radius server

QUESTION 28
Which two statements about background rogue scanning are correct? (Choose two.)

A dedicated radio configured for background scanning can support the connection of wireless clients

When detecting rogue APs, a dedicated radio configured for background scanning can suppress the rogue AP

Background rogue scanning requires DARRP to be enabled on the AP instance

A dedicated radio configured for background scanning can detect rogue devices on all other channels in its configured frequency band

QUESTION 29
As standard best practice, which configuration should be performed before configuring FortiAPs using a FortiGate wireless controller?

Create wireless LAN specific policies

Preauthorize APs

Create a custom AP profile

Set the wireless controller country setting

QUESTION 30
When using FortiPresence as a captive portal, which two types of public authentication services can be used to access guest Wi-Fi? (Choose two.)

Social networks authentication

Software security token authentication

Short message service authentication

Hardware security token authentication

QUESTION 31
Where in the controller interface can you find a wireless client’s upstream and downstream link rates?

On the AP CLI, using the cw_diag ksta command

On the controller CLI, using the diag wireless-controller wlac -d sta command

On the AP CLI, using the cw_diag -d sta command

On the controller CLI, using the WiFi Client monitor

QUESTION 32
Which two statements about background rogue scanning are correct? (Choose two.)

A dedicated radio configured for background scanning can support the connection of wireless clients

When detecting rogue APs, a dedicated radio configured for background scanning can suppress the rogue AP

Background rogue scanning requires DARRP to be enabled on the AP instance

A dedicated radio configured for background scanning can detect rogue devices on all other channels in its configured frequency band

QUESTION 33
As standard best practice, which configuration should be performed before configuring FortiAPs using a FortiGate wireless controller?

Create wireless LAN specific policies

Preauthorize APs

Create a custom AP profile

Set the wireless controller country setting

QUESTION 34
Which of the following is a requirement to generate analytic reports using on-site FortiPresence deployment?

SQL services must be running

Two wireless APs must be sending data

DTLS encryption on wireless traffic must be turned off

Wireless network security must be set to open

QUESTION 35
What is the first discovery method used by FortiAP to locate the FortiGate wireless controller in the default configuration?

DHCP

Static

Broadcast

Multicast

QUESTION 36
Refer to the exhibits.
Exhibit A

Exhibit B

A wireless network has been created to support a group of users in a specific area of a building. The wireless network is configured but users are unable to connect to it. The exhibits show the relevant controller configuration for the APs and the wireless network.
Which two configuration changes will resolve the issue? (Choose two.)

For both interfaces in the wtp-profile, configure set vaps to be “Authors”

Disable intra-vap-privacy for the Authors vap-wireless network

For both interfaces in the wtp-profile, configure vap-all to be manual

Increase the transmission power of the AP radio interfaces

QUESTION 37
Refer to the exhibits.
Exhibit A

Exhibit B

A wireless network has been created to support a group of users in a specific area of a building. The wireless network is configured but users are unable to connect to it. The exhibits show the relevant controller configuration for the APs and the wireless network.
Which two configuration changes will resolve the issue? (Choose two.)