(2024) PASS JN0-363 Exam Free Practice Test with 100% Accurate Answers [Q145-Q161]

Rate this post

(2024) PASS JN0-363 Exam Free Practice Test with 100% Accurate Answers

JN0-363 dumps Free Test Engine Verified By It Certified Experts

One of the unique features of the Juniper JN0-363 is that it emphasizes hands-on knowledge and experience required when working with Juniper Networks technology. This is reflected in the exam format, which includes practical, hands-on exams to simulate real-world scenarios. This hands-on approach to certification ensures that certified professionals are equipped to work in complex networking environments.

NEW QUESTION 145
Referring to the exhibit, what will happen to untagged frames?

The untagged frames are dropped.

The untagged frames are load balanced between VLAN 10 and VLAN 20.

The untagged frames are associated with VLAN 10.

The untagged frames are associated with VLAN 20.

NEW QUESTION 146
Which two statements are correct when using LDP? (Choose two.)

The lnet.3 table will contain only the paths explicitly defined.

The inet.3 table will contain a full mesh of label-switched paths to other LDP-enabled routers.

LDP label-switched paths are created by configuring LDP on at least one physical router interface.

LDP label-switched paths are created by configuring LDP on the loopbacK Interface.

NEW QUESTION 147
Click the Exhibit button.

You are configuring an IBGP group. When you commit your configuration, you receive the error shown in the exhibit.
Which additional configuration parameter must you add to your configuration?

multipath

type external

type internal

export <policy name>

NEW QUESTION 148
Click the Exhibit button. Referring to the exhibit, what must be true of the vlan_100 bridge domain?

vlan_100 has at least one Ethernet interface assigned to it.

vlan_100 does not have an Ethernet interface assigned to it.

vlan_100 might have an active Ethernet interface assigned to it.

vlan_100 does not have an active Ethernet interface assigned to it.

NEW QUESTION 149
Click the exhibit.

A customer has two VLANs to extend between Site-1 and Site-2. The customer does not want to route the VLANs or renumber the VLANs.
Referring to the exhibit, which two VLAN IDs are egressing the MX Series device towards the optical transport network after translation? (Choose two.)

500

501

201

200

NEW QUESTION 150
Click the Exhibit.

You have configured the IBGP group shown in the exhibit. However, committing your configuration fails.
Which parameter should you add to the IBGP group configuration to correct the problem?

Type external

Type internal

Export <policy name>

As -override

NEW QUESTION 151
You are asked to create connections between routing instances on the same Junos device and route between the connected Instances. What are two ways to accomplish this task? (Choose two.)

Use physical interfaces.

Use an IRB interface.

Use logical tunnel interfaces.

Use loopback interfaces.

NEW QUESTION 152
Click the Exhibit button.

Referring to the exhibit, which statement is true?

The router will attempt to signal the LSP along the IGP shortest path to 192.168.100.1

The router will prune links with insufficient bandwidth from the path before beginning the signaling process

The router will analyze the traffic engineering database to determine the best path through the network

The router will precalculate a valid path through the network for LSP r1-to-r3

NEW QUESTION 153
You have configured multiple IP-IP tunnels across your network to provide connectivity to remote sites.Which technique is used to help the IP endpoints in your network determine the optimal packet size to send across your tunnels?

path MTU discovery

fragmentation discovery

end-to-end MTU discovery

packet throughput discovery

NEW QUESTION 154
You are bringing a new network online with three IS-IS routers using default Junos election priorities. The routers are configured as Level 2 only IS-IS routers.
Which statement is true about the DIS election in this scenario?

The router with the highest MAC address will be elected as the DIS.

The router with the highest numerical lo0 IP address will be elected as the DIS.

The router with the lowest numerical lo0 IP address will be elected as the DIS.

The router with the lowest MAC address will be elected as the DIS.

NEW QUESTION 155
Referring to the exhibit, you have configured an aggregate route that represents the 172.21.0.0/24, 172.21.1.0/24, and 172.21.2.0/24 networks. However, when you view the routing table, your new route hidden.
Which action would you perform to determine the problem?

Verify that you have active contributing routes on the device.

Verify that you have configured a policy on the device to accept aggregate routes.

Verify that you have defined a metric value for the aggregate route.

Verify that you have set the preference to a lower default value.

NEW QUESTION 156
Which type of load balancing is shown in the exhibit?

elastic load balancing

per-packet load balancing

per-flow load balancing

network load balancing

NEW QUESTION 157
What is the purpose of STP BPDUs?

to exchange MAC addresses

to determine the least cost path

to determine the root-alternate port

to determine the root bridge

NEW QUESTION 158
Which BGP message type is used to re-advertise routes that have already been sent to a peer and acknowledged using TCP?

update

keepalive

notification

refresh

The BGP (Border Gateway Protocol) refresh message is used to request the re-advertisement of the IPv4 unicast or multicast routing information that was previously sent by the sender to the receiver and acknowledged using TCP. This message helps in refreshing the routes in case of route table changes or to ensure that the receiver has the latest and most accurate routing information.

NEW QUESTION 159
You are asked to assign interface xe-1/0/5 to a virtual switch. What must be accomplished to complete the configuration?

Interface xe-1/0/5 must be added to routing-instance sw-1 vlan_2.

Interface xe-1/0/5 must be a trunk port.

Interface xe-1/0/5 must be added to routing-instance sw-1.

An IRB interface must be configured to routing-instance sw-1 vlan_2.

NEW QUESTION 160
Referring to the exhibit, which two statements are correct? (Choose two.)

Devices in AS 65512 will prefer ISP A for traffic destined to the 172.20.21.0/24 network.

Devices In AS 65512 will prefer ISP A for traffic destined to the 172.20.0.0/24 network.

Devices in AS 65512 will prefer ISP B for traffic destined to the 172.20.21.0/24 network.

Devices In AS 65512 will prefer ISP B for traffic destined to the 172.20.0.0/24 network.

NEW QUESTION 161
Which two functions are performed by the OSPF designated router? (Choose two.)

It advertises link-state information to the AS

It designates some routers as inactive when not needed

It forms adjacencies with all the other OSPF routers on the link

It chooses the backup designated router

https://sites.google.com/site/amitsciscozone/home/juniper-junos/junos–ospf-designated-router

Loading …

Latest Juniper JN0-363 Practice Test Questions: https://www.dumpstorrent.com/JN0-363-exam-dumps-torrent.html

(2024) PASS JN0-363 Exam Free Practice Test with 100% Accurate Answers [Q145-Q161]

admin

Leave a Reply Cancel reply