Get Latest Jan-2025 Conduct effective penetration tests using DumpsTorrent D-PSC-MN-01 exam [Q48-Q67]

Rate this post

Get Latest [Jan-2025] Conduct effective penetration tests using DumpsTorrent D-PSC-MN-01

Penetration testers simulate D-PSC-MN-01 exam PDF

EMC D-PSC-MN-01 Exam Syllabus Topics:

Topic	Details
Topic 1	PowerScale Implementation: Geared towards cluster administrators, this section covers the practical aspects of implementing PowerScale systems. It focuses on creating new clusters, integrating nodes into existing clusters, and applying alternative configurations or accessories to improve performance.
Topic 2	PowerScale Hardware Installation: This section evaluates the installation capabilities of hardware engineers to test candidates on their ability to plan and execute the installation of PowerScale hardware, prepare the maintenance site, and adhere to best practices when installing racks, nodes, and related components.
Topic 3	PowerScale Hardware Concepts: This part of the exam assesses the expertise of IT infrastructure architects, and emphasizes the ability to differentiate between the architectural elements of PowerScale platforms, understand their specific use cases, and compare design specifications across PowerScale hardware models.
Topic 4	PowerScale Hardware Maintenance: Targeted at system administrators, this section focuses on key tasks involved in maintaining PowerScale hardware. It examines candidates’ proficiency in completing initial maintenance steps, preparing nodes for operation, and processing Field Replaceable Unit (FRU) and Customer Replaceable Unit (CRU) requests.

QUESTION 48
When setting up internal networking for a PowerScale cluster, what is a crucial requirement?

Public IP addresses for all nodes

Private interconnects between nodes

Unrestricted internet access

Serial connection between nodes

QUESTION 49
A platform engineer needs to run some commands on Node 2 of a Dell EMC PowerScale cluster.
Which command can they use to get the external IP address of Node 2, regardless of what node they are currently logged on to?

isi status -q

isi network external view

isi status -p

isi network subnets list

QUESTION 50
How do you ensure data continuity during a PowerScale node hardware upgrade?

Implement rolling upgrades across the cluster

Synchronize all nodes before starting the upgrade

Use data mirroring to an external backup cluster

Isolate the node being upgraded from the network

QUESTION 51
During the maintenance of PowerScale nodes, what is a Field Replaceable Unit (FRU)?

A component that can be replaced without sending the entire unit for repair

A software module that can be updated independently

A node that can be swapped with another in the cluster without downtime

An external device that enhances the node’s capabilities

QUESTION 52
What is the impact of network misconfiguration on a PowerScale cluster?

Reduced data transfer speeds

Increased risk of data corruption

Inability to perform node maintenance

Loss of cluster quorum

QUESTION 53
What are the necessary requirements for node class compatibility when adding new nodes to an existing cluster?

Same node series, same amount of memory installed, and same back-end NIC port speed

Same number of HDDs, same node model, same OneFS version above 9.0

Same node series, same number of HDDs, same HDD and SSD layout

Same OneFS version above 9.0, same back-end NIC port speed, same SED, and SSD security settings

QUESTION 54
A platform engineer must install several Dell PowerScale clusters.
Which rack should they use for the A3000 nodes?

Titan-HD

Titan-D

Titan-P

QUESTION 55
When testing connectivity to the Dell EMC PowerScale cluster through the Web Administration interface, what should be typed in the address line of the browser?

https://<clustername>:8080

http://<clustername>:80

http://<clustername>:8082

https://<clustername>:8081

QUESTION 56
When joining a new node to a cluster, why is reformatting or reimaging often required?

To ensure the node’s OS is compatible with the cluster

To remove any residual data from previous deployments

To update the node’s firmware to the latest version

To configure the node with the cluster-specific settings

QUESTION 57
What is the correct order of steps to repackage the shipping material for a Dell PowerScale cluster?

1. Stack the shipping bracket on the pallet. Place ramp section B upside-down on the pallet, then stack section A, right-side up.
2. Band the unit with shipping straps.
3. Apply the two collar sections to either side of the pallet and hold them in place with the package hood.
4. Stack the two folded outer sleeves above the ramp sections.
5. Lay each of the outer sleeves flat, then fold it lengthwise before collapsing the three sections.

1. Stack the shipping bracket on the pallet. Place ramp section B upside-down on the pallet, then stack section A, right-side up.
2. Apply the two collar sections to either side of the pallet and hold them in place with the package hood.
3. Lay each of the outer sleeves flat, then fold it lengthwise before collapsing the three sections.
4. Stack the two folded outer sleeves above the ramp sections.
5. Band the unit with shipping straps.

1. Lay each of the outer sleeves flat, then fold it lengthwise before collapsing the three sections.
2. Stack the shipping bracket on the pallet. Place ramp section B upside-down on the pallet, then stack section A, right-side up.
3. Stack the two folded outer sleeves above the ramp sections.
4. Apply the two collar sections to either side of the pallet and hold them in place with the package hood.
5. Band the unit with shipping straps.

1. Stack the two folded outer sleeves above the ramp sections.
2. Band the unit with shipping straps.
3. Apply the two collar sections to either side of the pallet and hold them in place with the package hood.
4. Lay each of the outer sleeves flat, then fold it lengthwise before collapsing the three sections.
5. Stack the shipping bracket on the pallet. Place ramp section B upside-down on the pallet, then stack section A, right-side up.

QUESTION 58
During the PowerScale hardware installation, why is it important to follow a structured cabling approach?

To optimize air flow within the rack

To facilitate future hardware upgrades and maintenance

To comply with industry cabling standards

To reduce electromagnetic interference

QUESTION 59
A customer is planning to expand a Dell PowerScale Gen5 cluster with H500 nodes What is a consideration?

A minimum of three H500 chassis are needed.

All new nodes must be on the network.

A minimum of four H500 nodes are needed.

A minimum of one H500 chassis is needed.

QUESTION 60
A customer has purchased a new Dell PowerScale cluster consisting of eight F600 nodes and four H5600 nodes.
What is required when installing these nodes?

Deep rack for the H5600 chassis

Step-up transformers for the H5600 nodes

At least one standard 40U-P rack

An additional 1U of space for cable management

QUESTION 61
A platform engineer needs to replace the fan on Dell PowerScale Gen 6 hardware.
Where can they find the fan module?

Compute module

Midplane

Suitcase

Front panel

QUESTION 62
A company is adding A200 nodes that have 10GigE back-end ports into their existing Dell PowerScale cluster of H500 nodes with 40GigE back-end ports. A platform engineer is asked to install the new nodes.
What is a consideration for the back-end network in a mixed cluster?

Connecting PowerScale nodes with different back-end speeds to the same back-end switch is only supported using breakout cables

Connecting PowerScale nodes with different back-end speeds to the same back-end switch is only possible if the backend is InfiniBand

PowerScale nodes with different back-end speeds cannot be connected to the same back-end switch

PowerScale nodes with different back-end speeds can connect to the same back-end switch

QUESTION 63
In the context of PowerScale, what are critical steps in the rack installation process?

Determining the rack’s load capacity

Securing the rack to the floor

Aligning the rack for optimal airflow

Ensuring compatibility with PowerScale node dimensions

QUESTION 64
Which cluster interface provides the most detailed network traffic statistics and enables file and directory operations on the cluster?

Web console

Serial console

Platform API

CLI

QUESTION 65
During the installation of racks for PowerScale, why is it important to ensure proper alignment and leveling?

To facilitate proper airflow and cooling

To ensure ease of access for future maintenance

To prevent physical strain on components

To optimize space utilization within the data center

QUESTION 66
What must be enabled in SMB to ensure nondisruptive upgrades?

SMB multichannel

SMB encryption

SMB direct

SMB continuous availability

QUESTION 67
A platform engineer is at a customer site to replace a failed Dell EMC PowerScale Gen 6 node. After removing the compute module, they observe lit LEDs inside the removed node.
What is the recommended response?

This is not normal; they need to shut down the partner node.

There is an internal electrical fault; they should call support.

The node is not yet completely shut down; they should wait.

This is normal; they should continue with the procedure.

Tested Material Used To D-PSC-MN-01 Test Engine: https://www.dumpstorrent.com/D-PSC-MN-01-exam-dumps-torrent.html

Get Latest Jan-2025 Conduct effective penetration tests using DumpsTorrent D-PSC-MN-01 exam [Q48-Q67]

EMC D-PSC-MN-01 Exam Syllabus Topics:

admin

Leave a Reply Cancel reply