The New HPE6-A75 2024 Updated Verified Study Guides & Best Courses [Q24-Q40]

5/5 - (1 vote)

The New HPE6-A75 2024 Updated Verified Study Guides & Best Courses

Authentic HPE6-A75 Exam Dumps PDF – 2024 Updated

Q24. Which statement is true about the Endpoint Profiler? (Select two.)

The Endpoint Profiler uses DHCP fingerprinting for device categorization.

Data obtained from the Endpoint Profiler can be used in Enforcement Policy.

Endpoint Profiler requires a profiling license.

The Endpoint Profiler requires the Onboard license to be enabled.

The Endpoint Profiler can only categorize laptops and desktops.

Q25. A customer wants to implement Virtual IP redundancy, such that in case of a ClearPass server outage, 802.1x authentications will not be interrupted. The administrator has enabled a single Virtual IP address on two ClearPass servers.
Which statements accurately describe next steps? (Select two.)

The NAD should be configured with the primary node IP address for RADIUS authentication on the 802.1x network.

A new Virtual IP address should be created for each NAD.

Both the primary and secondary nodes will respond to authentication requests sent to the Virtual IP address when the primary node is active.

The primary node will respond to authentication requests sent to the Virtual IP address when the primary node is active.

The NAD should be configured with the Virtual IP address for RADIUS authentications on the 802.1x network.

Q26. Refer to the exhibits.

Refer to the exhibits. The network administrator enters the commands shown in Exhibit 2. What is the spanning tree status on Al and A2?

A1 towards traffic, and A2 blocks traffic.

Both Al and A2 block traffic.

A1 blocks traffic, and A2 forwards traffic.

Both A1 and A2 forward traffic

Q27. An administrator creates service-based policies for AirGroup on the Mobility Master (MM). The administrator can define location-based policy limits based on which information?

AP names, AP groups, controller names, and controller groups

AP Fully Qualified Location Names (FQLNs) and controller Fully Qualified Domain Names (FQDNs)

AP names, AP groups, and AP Fully Qualified Location Names (FQLNs)

Controller names, controller groups, and controller Fully Qualified Domain Names (FQDNs)

Q28. An administrator needs to authenticate users connected to an ArubaOS Switch where the switch authenticates the user, assigns the firewall policies to the user, and processes some of the users’ traffic. Which connection method should the administrator configure on the ArubaOS-Switch?

Per-user tunneled node

Split-tunneled mode

Per-port tunneled node

VLAN tunneled mode

Q29. Refer to the exhibit.

A known unicast packet is received from Switch-1 on the standby and must be forwarded to Switch-2. How does the VSF fabric decide which port in the aggregated (ink should forward the packet?

The standby uses its own port in the link aggregation to forward the fabric.

The standby sends the packet to the commander over a VSF link, and the commander decides the correct port.

The standby uses the typical load sharing algorithm, and it might select either its port or the commander’s port.

The standby selects the port on the designated forwarder for the aggregation.

Q30. An administrator configures an ArubaOS-Switch for per -user tunneled node. Which protocols does the switch use to establish and maintain a connection with the Aruba Mobility Controller (MO? (Select two.)

GRE

SSL

PAPI

IPSec

Q31. Which solution allows administrators to monitor link status and port utilization on AOS-Switches from a centralized location?

Aruba Mobility Controller

Aruba AirWave

Aruba Mobility Manager

Aruba ClearPass

Q32. Refer to the exhibit.

When configuring a Web Login Page in ClearPass Guest, the information shown is displayed. What is the Address field value ‘securelogin.arubanetworks.com’ used for?

for ClearPass to send a TACACS+ request to the NAD

for appending to the Web Login URL, before the page name

for the client to POST the user credentials to the NAD

for ClearPass to send a RADIUS request to the NAD

for appending to the Web Login URL, after the page name.

Q33. Refer to the exhibit.

Based on the Attribute configuration shown, which statement accurately describes the status of attribute values?

Only the attribute values of department and memberOf can be used in role mapping policies.

The attribute values of department, title, memberOf, telephoneNumber, and mail are directly applied as ClearPass.

Only the attribute value of company can be used in role mapping policies, not the other attributes.

The attribute values of department and memberOf are directly applied as ClearPass roles.

Only the attribute values of title, telephoneNumber, and mail can be used in role mapping policies.

Q34. A network administrator configures V5F settings on two Aruba 2930F switches. The switches form two separate VSF fabrics. What should the administrator check?

that the domain ID matches on both switches

that each switch is assigned a unique VSF priority

that the switch with the lower priority has the lower member ID

that LLDP MAD is configured on both members

Q35. Refer to the exhibits.

The network administrator enters the commands shown in Exhibit 2. What is the spanning tree status on Al and A2?

A1 towards traffic, and A2 blocks traffic.

Both Al and A2 block traffic.

A1 blocks traffic, and A2 forwards traffic.

Both A1 and A2 forward traffic

Q36. A customer wants to implement Virtual IP redundancy, such that in case of a ClearPass server outage, 802.1x authentications will not be interrupted. The administrator has enabled a single Virtual IP address on two ClearPass servers.
Which statements accurately describe next steps? (Select two.)

The NAD should be configured with the primary node IP address for RADIUS authentication on the 802.1x network.

A new Virtual IP address should be created for each NAD.

Both the primary and secondary nodes will respond to authentication requests sent to the Virtual IP address when the primary node is active.

The primary node will respond to authentication requests sent to the Virtual IP address when the primary node is active.

The NAD should be configured with the Virtual IP address for RADIUS authentications on the
802.1x network.

Q37. Refer to the exhibit.

Based on the Policy configuration shown, which VLAN will be assigned when a user with ClearPass role Engineer authenticates to the network successfully on Saturday using connection protocol WEBAUTH?

Deny Access

Employee VLAN

Internet VLAN

Full Access VLAN

Q38. Refer to the exhibit.

An AD user’s department attribute is configured as *HR”. The user connects on Monday using their Windows Laptop to a switch that belongs to the Device Group HQ. Which role is assigned to the user in ClearPass?

Executive

iOS Device

Vendor

Remote Employee

HR Local

Q39. When is it necessary to use an SNMP based Enforcement profile to send a VIAN?

When we have to assign a vlan to a wired user on a third party wired switch that doesn’t support RADIUS return attributes.

When we have to assign a VLAN to a wired user on an Aruba Mobility Access Switch.

When we have to assign a VIAN to a wired user on an Aruba Mobility Controller.

When we have to assign a VLAN to a wired user on a third party wired switch that doesn’t support RADIUS authentication.

When we have to assign a VLAN to a wireless user on an Aruba Mobility Controller.

Q40. Refer to the exhibit.

A company has attempted to implement OSPF without success. The devices in Area I need to be able to reach Area 2. Routes should be aggregated for advertisement in other areas. What must be changed to meet these requirements?

Change Area 3 to Area 0; remove Area 1 from Switch-2 and Area 2 from Switch-1.

Add the 10.2.0.0/16 range on Swttch-1 and the 10.1.0.0/16 range on Switch-2.

Add Area 1 and Area 2 on VIAN 100 on both Switch-1 and Switch-2. Remove Area 3.

Move the 10.1.0.0/16 range to Area 2 on Switch-1 and the 10.2.0.0/16rangetoArea 1 onSwitch-2.

Loading …

HP HPE6-A75 exam is a challenging and comprehensive exam that covers a wide range of topics related to Aruba networking solutions. HPE6-A75 exam covers concepts such as Aruba Mobility Controllers, Aruba Access Points, Aruba AirWave, and Aruba ClearPass. HPE6-A75 exam also tests the candidate’s knowledge of wireless LAN design, troubleshooting, and network security.

Passing the HPE6-A75 exam will demonstrate your proficiency in Aruba technologies and make you a valuable asset to any organization that uses Aruba products. Aruba Certified Edge Professional Exam certification exam will help you to stand out from other IT professionals and increase your earning potential. Additionally, the Aruba Certified Edge Professional certification is a prerequisite for advanced certifications, such as the Aruba Certified Mobility Professional and Aruba Certified ClearPass Professional certifications.

Get Prepared for Your HPE6-A75 Exam With Actual 72 Questions: https://www.dumpstorrent.com/HPE6-A75-exam-dumps-torrent.html

The New HPE6-A75 2024 Updated Verified Study Guides & Best Courses [Q24-Q40]

admin

Leave a Reply Cancel reply