[Q253-Q276] Verified 300-410 dumps Q&As – Pass Guarantee Exam Dumps Test Engine [2024]

NO.253 Drag and drop the packet types from the left onto the correct descriptions on the right.

NO.254 Refer to the exhibits.

When DMVPN is configured, which configuration allows spoke-to-spoke communication using loopback as tunnel source?

NO.255

Refer to the exhibit. The OSPF neighbor relationship is not coming up What must be configured to restore OSPF neighbor adjacency?

NO.256 Refer to the exhibits.

A user on the 192.168.1.0/24 network can successfully ping 192.168.3.1, but the administrator cannot ping 192.168.3.1 from the LA router. Which set of configurations fixes the issue?
A)

B)

C)

D)

NO.257 An engineer configured policy-based routing for a destination IP address that does not exist in the routing table. How is the packet treated through the policy for configuring the set ip default next-hop command?

NO.258 What is an advantage of using BFD?

NO.259 Refer to the exhibit.

A network administrator is trying to access a branch router using TACACS+ username and password credentials, but the administrator cannot log in to the router because the WAN connectivity is down. The branch router has following AAA configuration:

Which command will resolve this problem when WAN connectivity is down?

NO.260 Refer to the exhibit.

Which two commands provide the administrator with the information needed to resolve the issue? (Choose two.)

NO.261 Refer to the exhibit.

Which subnet is redistributed from EIGRP to OSPF routing protocols?

NO.262 Refer to the exhibit. An engineer is trying to log in to R1 via R3 loopback address. Which action resolves the issue?

NO.263 Refer to the exhibits.

A user on the 192.168.1.0/24 network can successfully ping 192.168.3.1, but the administrator cannot ping 192.168.3.1 from the LA router. Which set of configurations fixes the issue?
A)

B)

C)

D)

NO.264 Refer to the exhibit.

The network administrator must mutually redistribute routes at the Chicago router to the LA and NewYork routers. The configuration of the Chicago router is this:

After the configuration, the LA router receives all the NewYork routes, but NewYork router does not receive any LA routes. Which set of configurations fixes the problem on the Chicago router?
A)

B)

C)

D)

NO.265 The network administrator configured R1 to authenticate Telnet connections based on Cisco ISE using TACACS+. ISE has been configured with an IP address of 192.168.1.5 and with a network device pointing toward R1(192.168.1.1) with a shared secret password of Cisco123.

The administrator cannot authenticate to R1 based on ISE. Which configuration fixes the issue?

NO.266 Exhibit:

BGP is flapping after the Copp policy is applied. What are the two solutions to fix the issue?
(Choose two)

NO.267 Refer to the exhibit.

An engineer is trying to connect to a device with SSH but cannot connect. The engineer connects by using the console and finds the displayed output when troubleshooting. Which command must be used in configuration mode to enable SSH on the device?

NO.268 Drag and drop the MPLS concepts from the left onto the descriptions on the right.

NO.269 Drag and drop the actions from the left into the correct order on the right to configure a policy to avoid following packet forwarding based on the normal routing path.

NO.270 Refer to the exhibit.

Refer to the exhibit A network administrator is troubleshooting to reduce the routing table of R4 and R5 to learn only the default route to communicate from Inter-Area and Intra-Area networks Which configuration resolves the issue?

NO.271 Drag and drop the MPLS VPN device types from me left onto the definitions on the right.

NO.272 A network engineer is investigating a flapping (up/down) interface issue on a core switch that is synchronized to an NTP server. Log output does not show the time of the flap. Which command allows on the switch the time of the flap according to the clock on the device?

NO.273 Refer to the exhibit.

An engineer is monitoring reachability of the configured default routes to ISP1 and ISP2. The default route from ISP1 is preferred if available. How is this issue resolved?

NO.274 What are two functions of LDP? (Choose two.)

NO.275

Refer to the exhibit. A network engineer cannot remote access R3 using Telnet from switch S1. Which action resolves the issue?

NO.276 Refer to the exhibits.

Phase-3 tunnels cannot be established between spoke-to-spoke in DMVPN. Which two commands are missing? (Choose two.)