Real JN0-649 Dumps - Juniper Correct Answers updated on 2024 [Q46-Q66]

Rate this post

Use Real JN0-649 Dumps – Juniper Correct Answers updated on 2024

JNCIP-ENT JN0-649 Exam Practice Dumps

Juniper JN0-649 (Enterprise Routing and Switching, Professional (JNCIP-ENT)) Certification Exam is a professional certification exam offered by Juniper Networks. JN0-649 exam is designed for network professionals who have a strong understanding of networking technologies and experience working with Juniper Networks products. JN0-649 exam tests candidates on their ability to design, implement, and troubleshoot enterprise-level routing and switching solutions using Juniper Networks technologies.

Juniper JN0-649 (Enterprise Routing and Switching, Professional (JNCIP-ENT)) Certification Exam is designed for IT professionals who specialize in enterprise routing and switching technologies. Enterprise Routing and Switching, Professional (JNCIP-ENT) certification exam validates the knowledge and skills required to design, configure, and troubleshoot Juniper Networks enterprise routing and switching platforms.

NEW QUESTION 46
You must provide network connectivity to hosts that fail authentication. In this scenario, what would be used in a network secured with 802.1X to satisfy this requirement?

Configure the native-vlan-id parameter on the port.

Use the server-reject-vlan command to specify a guest VLAN.

Configure a secondary IP address on the port for unauthenticated hosts.

Configure the port as a spanning tree edge port.

NEW QUESTION 47
You are using 802.1X authentication in your network to secure all ports. You have a printer that does not support 802.1X and you must ensure that traffic is allowed to and from this printer without authentication.
In this scenario, what will satisfy the requirement?

MAC filtering

MACsec

static MAC bypass

MAC RADIUS

NEW QUESTION 48
Which EVPN route type is used for fast convergence and for advertising the split horizon label?

Type 4

Type 2

Type 1

Type 5

NEW QUESTION 49
Your organization has recently acquired another company. You must carry all of the company’s existing VLANs across the corporate backbone to the existing branch locations without changing addressing and with minimal configuration.
Which technology will accomplish this task?

Q-in-Q all-in-one bundling

PVLAN isolated VLAN

MVRP registration normal

EVPN-VXLAN anycast gateway

NEW QUESTION 50
The policy shown in the exhibit is applied as an export policy to your BGP neighborship.
Which action will be taken for route 12.233.45.5?

It will be evaluated by the next policy.

It will be accomplished by term 1.

It will be accepted by term 1.

It will be rejected by term 2.

It will be accepted by the default policy

NEW QUESTION 51
You are deploying IP phones in your enterprise networks. When plugged in, the IP phones must automatically negotiate the power requirements for the new connection with the EX Series switches.
In this scenario, which protocol should be used to enable this behavior?

CDP

MP-BGP

LLDP-MED

LLDP

NEW QUESTION 52
You are asked to merge a RIP network with your OSPF network. As a first step, you establish connectivity between the RIP network and the OSPF network. The RIP network connects to an NSSA area. Which two statements are true in this scenario? (Choose two.)

To share RIP routes with the OSPF network, an export policy will be required on the ABR.

To share RIP routes with the OSPF network, an export policy will be required on the ASBR.

By default, external OSPF routes have a higher route preference than RIP routes.

Be default, RIP routes have a higher route preference than external OSPF routes.

NEW QUESTION 53
Referring to the exhibit, anycast RP is implemented to ensure multicast service availability. The source is currently sending multicast traffic using group 239.1.1.1 and R3 is receiving PIM register messages, but R2 does not have active source information. In this scenario, what are two methods to receive the active source information on R2? (Choose two.)

Configure an RP set in PIM on R1, allowing R1 to forward PIM register messages to R2 and R3 in the set.

Configure an MSDP protocol between R2 and R3.

Configure an RP set in PIM on R2 and R3, allowing the RPs to forward PIM register messages to the other RPs in the set.

Configure an MSDP protocol between R1 and R2.

NEW QUESTION 54
You have an IPv4 multicast network configured as PIM-SM. What must be done before replacing your static RP with auto-RP?

Enable sparse-dense mode on each of the routers in the network.

Configure auto-RP domains on each router in the network.

Configure each router in the network as a candidate BSR.

Enable each router in the network to forward multicast packets.

NEW QUESTION 55
When using wide metrics, which two statements about route advertisement between IS-IS levels are correct?
(Choose two.)

Level 1 and Level 2 routers do not advertise Level 2 routes into the Level 1 area by default.

Level 1 routes are advertised to Level 2 routers by default.

If wide-metrics-only is configured, Level 1 routes are not advertised to Level 2 routers by default.

Level 1 routes advertised as external routes into Level 1 are not advertised to any Level 2 routers by default.

NEW QUESTION 56
Referring to the exhibit, which two statements are correct? (Choose two.)

BPDUs from the root bridge for VLAN 10 have been received on the ge-0/0/7.0 interface.

DS-1 is the root bridge for VLAN 10.

BPDUs from the root bridge for VLAN 20 have been received on the ge-0/0/7.0 interface.

Default VSTP bridge priority values are configured.

NEW QUESTION 57
What information is contained in an OSPF LSA header? (Choose two.)

protocol

options

length

subnet mask

NEW QUESTION 58
When configuring class of services, what would be you use to allocate bandwidth to a forwarding class?

buffer depth

transmit rate

bandwidth

speed

NEW QUESTION 59
Click the Exhibit button.

Which well-known community needs to be used to restrict 10.0.0.0/8 from being advertised to AS
2?

no-publish

no-advertise

no-export-subconfed

no-export

NEW QUESTION 60
Referring to the exhibit, which statement is true?

R1 is an ASBR.

R1 has the B bit set.

R1 is a backbone router.

R1 is an ABR.

NEW QUESTION 61
In IS-IS advertising POUs with the overload bit has which effect?

The local device will no longer be used for transit traffic

The local device’s POUs are marked with a metric of 65535

The ISIS adjacencies become passive

The IS-IS adjacencies enter the “new” state

NEW QUESTION 62
You are configuring MSTP to prevent loops in your Layer 2 network. After applying the configuration, you notice that MSTO is not working correctly.

Referring to the exhibit, what is causing the problem?

Too many VLANs have been defined.

Context identifier must be specified.

MSTI-to-VLAN mappings must be the same.

Incorrect revision number is used.

NEW QUESTION 63
A BGP network has been designed to provide resiliency and redundancy to a multihomed customer network.
Which two statements are correct in this scenario? (Choose two.)

Both the next hops will be used to forward traffic to R2.

A routing policy will be required to forward traffic to both next hops.

The TTL value of 1 is set to limit the scope of the EBGP session.

The ttl statement must be configured to accommodate peering to a loopback address of a directly connected peer.

NEW QUESTION 64
Which statement is true regarding LLDP advertisements?

LLDP communicates VLAN information to VoIP devices

LLDP communicates device information to neighbors

LLDP communicates power requirements from PoE enabled devices

LLDP communicates CoS values to VoIP devices

NEW QUESTION 65
You have scheduled maintenance operations for one of the devices in your OSPF network.
Referring to the exhibit, which three statements are correct? (Choose three.)

R1 does not participate in OSPF routing.

Any traffic destined for networks that terminate on R1 will still be forwarded to R1.

The metrics for all transit interfaces on R1 is set to the maximum value of 65,535.

R1 participates in OSPF routing but does not send or receive transit traffic.

R1 does not send or receive transit traffic during the maintenance window even if no alternative paths exist to the given destination.

NEW QUESTION 66
Which two statements are true regarding BGP load balancing? (Choose two.)

Multipath provides per-flow load balancing.

Multipath provides per-prefix load balancing.

Multipath places multiple next-hops in the forwarding table for each destination.

Multipath places a single next-hop in the forwarding table for each destination.

Get ready to pass the JN0-649 Exam right now using our JNCIP-ENT Exam Package: https://www.dumpstorrent.com/JN0-649-exam-dumps-torrent.html

Real JN0-649 Dumps – Juniper Correct Answers updated on 2024 [Q46-Q66]

admin

Leave a Reply Cancel reply