[Jul-2022] Download Real JN0-648 Exam Dumps for candidates 100% Free Dump Files [Q23-Q38]

Rate this post

[Jul-2022] Download Real JN0-648 Exam Dumps for candidates. 100% Free Dump Files

Prepare Important Exam with JN0-648 Exam Dumps(2022) 

Juniper JN0-648 Exam Syllabus Topics:

Topic Details
Topic 1
  • Components of IP multicast, including multicast addressing
  • BGP attributes: concept and operation
Topic 2
  • Considerations when using multiple authentication
  • access control methods
  • Layer 2 tunneling using Q-in-Q and L2PT
Topic 3
  • Describe the concepts, operation, or functionality of Junos CoS for Layer 2 or 3 networks
  • Dynamic VLAN registration using MVRP
Topic 4
  • Demonstrate how to configure, troubleshoot, or monitor Layer 2 authentication or access control
  • BGP route selection process
Topic 5
  • Rendezvous point (RP): concept, operation, discovery, and election
  • Describe the concepts, operation, or functionality of BGP
Topic 6
  • Describe the concepts, operation, or functionality of IP multicast
  • Tunnel Layer 2 traffic through Ethernet networks
Topic 7
  • Describe the concepts, operation, or functionality of advanced Ethernet switching
  • PIM dense-mode and sparse-mode
Topic 8
  • Demonstrate knowledge of how to configure, troubleshoot, or monitor IGPs
  • Any-Source Multicast (ASM) vs. Source-Specific Multicast (SSM)
Topic 9
  • Demonstrate knowledge of how to configure, troubleshoot, or monitor BGP
  • Describe the concepts, operation, or functionality of IGPs

 

NO.23 You want to view the VLANs that have been created dynamically using MVRP.
Which operational mode command will display this information?

 
 
 
 

NO.24 When configuring class of services, what would be you use to allocate bandwidth to a forwarding class?

 
 
 
 

NO.25 Click the Exhibit button.

Referring to the exhibit, the source is currently sending multicast traffic using group 224.1.1.1, which is being received by R1. R2 is not receiving PIM register messages.
What would be the cause of this problem?

 
 
 
 

NO.26 You have PIM SM multicast configure and running in a network environment comprised of EX4300 devices.
Your customer report increased delay when switching channels using IPTV. To help decrease the delay, you implement PIM join balancing. You add the set protocol pim join-load-balance command to the configuration.
After committing,you notice that the flows are still using one path.
In this scenario, which statement is correct?

 
 
 
 

NO.27 You are using 802.1X in your access network consisting of EX Series switches. You recently had a failure with your RADIUS server which resulted in authenticating client devices being denied access to the network. You want to change this behavior so that authenticating clients are directed to a remediation VLAN.
Which RADIUS server failback setting satisfies this requirement?

 
 
 
 

NO.28 Click the Exhibit button.

You are configuring BGP policies for a site with a dual-homed connection as shown in the exhibit. You must ensure that inbound traffic from Internet hosts flow through the ISP A connection.
Which statement is correct in this scenario?

 
 
 
 

NO.29 Exhibit.

Which two statements are true about the 802. 1X output shown in the exhibit? (Choose two.)

 
 
 
 

NO.30 Click the Exhibit button.

Referring to the exhibit, the source is currently sending multicast traffic using group 224.1.1.1, which is being received by R1. R2 is not receiving PIM register messages.
What would be the cause of this problem?

 
 
 
 

NO.31 What information is contained in an OSPF LSA header? (Choose two.)

 
 
 
 

NO.32 You are redistributing static routes into an OSPF area.
Which two statement are true is this scenario? (Choose two.)

 
 
 
 

NO.33

Referring to the exhibit, there are multiple ASM groups in the 224.0.0.0/4 range.
Which configuration change is needed to ensure R1 is always the RP for group 224.224.1.1?

 
 
 
 

NO.34 You are using 802.1X in your access network consisting of EX Series switches. You recently had a failure with your RADIUS server which resulted in authenticating client devices being denied access to the network. You want to change this behavior so that authenticating clients are directed to a remediation VLAN.
Which RADIUS server failback setting satisfies this requirement?

 
 
 
 

NO.35 Exhibit.

You recently implemented the configurations shown in the exhibit. After committing these changes, the community devices connected to AS-1 are not able to communication with the appropriate community devices connected to AS-2.
What must be to allow these community devices to communicate?

 
 
 
 
 

NO.36 Click the Exhibit button.

Referring to the exhibit, which TTL value will be sent to the LLDP neighbors?

 
 
 
 

NO.37 Exhibit:

Referring to the exhibit, a RMSM network is set up to enable communication between multicast devices.
Which statement is true in this scenario?

 
 
 
 

NO.38 Exhibit.

You are troubleshooting a route problem in the topology shown in the exhibit. The 10.30.0 0/24 route is not reachable from the R3 router. What would cause this problem?

 
 
 
 

How to Prepare for Juniper JN0-648: Enterprise Routing and Switching, Professional (JNCIP-ENT) Exam

Preparation Guide for Juniper JN0-648: Enterprise Routing and Switching, Professional (JNCIP-ENT) Exam

Introduction

Juniper Networks, Inc. is an American multinational company based in Sunnyvale, California. The business designs and markets networking products, including routers, switches, network management tools, network security products, and software-defined networking technologies.

Juniper Networks initially concentrated on core routers used by Internet Service Providers (IENTs) to conduct IP address searches and guide internet traffic. By purchasing Unisphere, the firm joined the market in 2002 for edge routers used by IENTs to redirect Internet traffic to individual users. In 2003, Juniper joined the IT defense business with its JProtect security toolkit before purchasing NetScreen Technologies security company the following year. Juniper joined the enterprise market in the early 2000s, accounting for one-third of its sales by 2005. As of 2014, Juniper concentrated on designing innovative software-defined networking devices.

Many applicants involved in Service Provider Routing and Switching, Technical (JNCIP-ENT) qualification may be familiar with the JN0-662 test. However, the JN0-662 Lifetime Exam (EOL) concluded on June 21, 2020. You need to take the JN0-648 Juniper certification exam now to complete the Service Provider Routing and Switching, Technical (JNCIP-ENT) certification exam. Juniper JNCIP – ENT Certification is the technical standard of Juniper Service Provider Routing and Switching Certification Track. The Juniper Networks Certification Program (JNCP) Service Provider Routing and Switching Track help members to show competence in Juniper Networks technologies. Successful candidates show comprehensive knowledge of networking technologies in general and the Juniper Networks service provider routing and switching platforms. This credential protocol allows applicants to pass four tests, including the Associate Exam (JN0-103), the Expert Exam (JN0-362), and the Technical Exam (JN0-648).

In this guide, we will cover the Juniper JN0-648 practice exams, certified professionals salary, and all aspects of the Juniper JN0-648 exam dumps.

What is the duration of the Juniper JN0-648: Enterprise Routing and Switching, Professional (JNCIP-ENT) Exam

  • Language: English
  • Number of Questions: 65
  • Length of Examination: 120 minutes
  • Format: Multiple choices, multiple answers

 

JN0-648 Questions – Truly Beneficial For Your Juniper Exam: https://www.dumpstorrent.com/JN0-648-exam-dumps-torrent.html

admin

Leave a Reply

Your email address will not be published. Required fields are marked *

Enter the text from the image below
 

DMCA Privacy Policy Contact US
Copyright © 2022 Exam Dumps Torrent.