2023 Updated SAP E-S4HCON2022 Certification Study Guide Pass E-S4HCON2022 Fast [Q20-Q42]

Rate this post

2023 Updated SAP E-S4HCON2022 Certification Study Guide Pass E-S4HCON2022 Fast

E-S4HCON2022 Dumps PDF 2023 Program Your Preparation EXAM SUCCESS

NO.20 Which downtime optimization technique requires the minimized downtime service (MDS) from SAP?

Downtime Optimized DMO (DoDMO)

Near-Zero Downtime Maintenance (nZDM)

Near-Zero Downtime Technology (NZDT)

Downtime Optimized Data Conversion (DoC)

NO.21 Which steps can SUM perform during an SAP S/4HANA conversion? Note; There are 2 correct answers to this question.

Unicode conversion

Custom code analysis

Database migration

Software update

NO.22 In which part of an upgrade does SUM allow you to generate ABAP loads (SGEN)?
There are 2 correct answers to this question.

During downtime

During SPDD

Post-downtime

During uptime

NO.23 What is the different between the benchmaking and the repetition option of the Database Migration Option (DMO) of SUM?

The benchmaking option allows you to migration a specified set of tables

The benchmaking option allows you to repeat the uptime migration

The repetition option allows you to run the migration without a shadow system

The repetition option allows you to repeat the complete migration

NO.24 ICNV initialization does 3

Creation of views

Creation of flag

Build index on flag column

NO.25 You performed a custom code check for an SAP S/4HANA conversion. In which transactions can you review the results?
There are 2 correct answers to this question.
Response:

SYCM (Simplification Database Content)

SAT (Runtime Analysis)

ATC (ABAP Test Cockpit)

SE80 (Object Navigator)

NO.26 Which of the following are valid options to check the progress of an inplace SUM DMO run? Note There are 2 correct answers to this question

Check the dump size of the database export on disk.

Check the Charts Control Center in the SUM Ul

Check logs for jobs starting with RSUPG_SGEN in the SAP system.

Check the log files written in the SUM directory subdirectory abap. subdirectory log

NO.27 During the upgrade of your development system, you run into the adjustment of non-dictionary objects handled by transaction SPAU There you find programs that are shown in status “automatic adjustment (green traffic tight). What will happen with these programs when you continue with your upgrade without performing any other actions inside your SAP system?

SUM continues with the next phase and your modifications are kept as In the start release

SUM continues with the next phase and your modifications are lost

Before continuing with the next phase SUM asks for a modification adjustment transport

SUM refuses to continue unless you have marked a transport request as modification adjustment transport

NO.28 What do you need to consider when performing the SI checks for an SAP S’4I 1ANA conversion? Note There are 2 correct answers to this question.

You need an SAP system based on AS ABAP 7.50 or above for the SI check framework

The SI checks are executed in the development system and the results are transported into the subsequent systems

The errors from the SI checks must be solved, otherwise. SUM will report an error

You need to build up an SI check framework by applying SAP Notes

NO.29 You are planning to use DMO of SUM to perform an “inplace-migration” to SAP HANA.
What do you need to consider? Note: there are 2 correct answers to this question.

The source system is non-Unicode and the target database is a scale-out system.

The target database size increases temporarily because of the Shadow Repository.

SAP HANA Landscape Reorganization required a manual step to edit a file.

Network capacity between exporting and importing R3load processes must be.

Unicode conversion is part of DMO only in case of target version AS ABAP 7.40 or 7.31.

NO.30 Which circumstances will allow SUM to run without the creation of a shadow system?
Please choose the correct answer.
Response:

Using the main configuration option “Single System” when installing an Add-On

Using the main configuration option “Single System” in case of an upgrade.

Using the database migration option (DMO) for SUM

Using the main configuration option “Standard” when applying SAP Support Packages

NO.31 You are planning to upgrade your SAP ECC 6.07 system running on a single codepage (SCP) to SAP ECC 6.08. What is the recommended option to perform this upgrade?
Please choose the correct answer.
Response:

Perform the upgrade to SAP ECC 6.08 before the Unicode conversion.

Combine the upgrade and the Unicode conversion using the Twin Upgrade &Unicode Conversion (TU &UC) procedure.

Perform the Unicode conversion before the upgrade to SAP ECC 6.08.

Combine the upgrade and the Unicode conversion using the Combined Upgrade &Unicode Conversion (CU &UC) procedure.

NO.32 What are the benefits of using the benchmarking option of the DMO for SUM? Note There are 2 correct answers to this question

You can verify that the content of the download directory matches the stack XML file.

You can obtain migration duration tiles from a previous benchmark run that can be used to optimize the next runs

You can record the modification adjustment during migration and use the transports in the next runs.

You can find the optimal number of parallel H3load processes by monitoring host performance

NO.33 During an SAP S/4HANA conversion with DMO, which of the following actions take place during the business downtime of the SUM procedure?
There are 3 correct answers to this question.
Response:

Execution of SPAU modification adjustment

Execution of eCATTs for business validation tests

Creation of the table structures in the new SAP HANA database

Execution of SPDD modification adjustment

Execution of XPRAs and AIMs

NO.34 You are performing an inplace SAP S/4HANA conversion including DMO. What is the latest point in time when you can reset the procedure without losing data?

The start of the Execution roadmap step

The start of the business downtime

The end of the business downtime

The end of the database migration

NO.35 What can you achieve by setting the SUM parameter “migration_only” to 1 in parameter file SAPup_add.par?
Please choose the correct answer.
Response:

An upgrade of the software components is performed, without changing the database type.

A change of the database type is performed, without changing the software components.

An SAP S/4HANA conversion is performed, without adapting the customer data.

A migration of the SAP system to a new hardware is performed, without performing an SAP S/4HANA conversion.

NO.36 You are performing an upgrade with SUM. You are in the BIND_PATCH phase of the roadmap step “Configuration”. For some software components you find entries in the “Calculated level” column.
What does the “Calculated level” indicate for those software components?
Please choose the correct answer.
Response:

The SAP Support Packages that will be bound to the upgrade

The SAP Support Packages contained in the upgrade media

The SAP Support Packages found in the download directory

The SAP Support packages of the Support Package Stack, calculated by the Maintenance Planner

NO.37 What SAP systems can you use for the ABAP Test Cockpit (ATC) to perform the custom code analysis for an SAP S/4HANA conversion? Note: There are 2 correct answers to this question.

Standalone AS ABAP with SAP_BASIS 752 and above

SAP ECC system from SAP ERP 6.0 EHP 8

SAP Solution Manager 7.2

SAP S/4HANA Server 1809 and above

NO.38 Which additional configuration options are offered by SUM when selecting “Switch expert mode on” in main configuration option “Standard”?
There are 2 correct answers to this question.
Response:

Keep archiving on during the whole procedure.

Use the Near Zero Downtime Maintenance Technology (NZDM).

Reuse a profile for the shadow instance from a previous run.

Choose the instance number of the shadow instance.

NO.39 You are planning to use DMO of SUM to perform an “inplace-migration” to SAP HANA. What do you need to consider? Note: there are 2 correct answers to this question.

The source system is non-Unicode and the target database is a scale-out system.

The target database size increases temporarily because of the Shadow Repository.

SAP HANA Landscape Reorganization required a manual step to edit a file.

Network capacity between exporting and importing R3load processes must be.

Unicode conversion is part of DMO only in case of target version AS ABAP 7.40 or 7.31.

NO.40 You are planning an SAP S/4HANA conversion. Which conversion-specific tasks need to be performed during the preparation phase?
There are 2 correct answers to this question.
Response:

Run the database migration to the SAP HANA database

Perform the migration of data into the new data structure

Check the compatibility of custom code with SAP S/4HANA

Apply the recommendations of the simplification list

NO.41 You are performing an SAP S/4HANA conversion for your production system. This conversion requires that certain business functions are switched on.
Following SAP recommendations, how will you achieve this?
There are 2 correct answers to this question.
Response:

Specify the business functions that need to be switched on during the prepare part of SUM.

Import a transport request from the development system that contains the recording of the activation.

Activate the required business functions manually in the production system.

During conversion, SUM delivers some business functions already activated.

NO.42 You want to perform an SAP S/4HANA conversion using SUM with DMO. Which steps run before the beginning of the technical downtime, independent of your SUM configuration?
There are 3 correct answers to this question.
Response:

Generation of the new ABAP loads in phase RUN_SGEN_GENER8

Import of upgrade and language data from the download directory in phase TABIM UPG

Activation of dictionary objects in phase ACT_UPG

Creation of application tables in the SAP HANA database in phase EU_CLONE_MIG_DT_CREATE

Import of dictionary objects from the download directory in phase DDIC_UPG

Get Perfect Results with Premium E-S4HCON2022 Dumps Updated 75 Questions: https://www.dumpstorrent.com/E-S4HCON2022-exam-dumps-torrent.html

2023 Updated SAP E-S4HCON2022 Certification Study Guide Pass E-S4HCON2022 Fast [Q20-Q42]

admin

Leave a Reply Cancel reply