[2023] Easy To Download OSP-002 Actual Exam Dumps Resources [Q95-Q117]

NO.95 One cannot emphasize strongly enough the value of _________.

NO.96 You can keep track of how much cable is left in a box if you ___________.

NO.97 What do Category 3, Category 5e and Category 6 designations mean?

NO.98 The loss of a singlemode fiber is lowest at __________.

NO.99 If you use a Cat 3 UTP jack on newer Cat 5e cable plant, the link performance will meet ______specs.

NO.100 Today, with the exception of some _________, the entire telephone backbone is fiber optics..

NO.101 The principle of operation of OTDRs is similar to _______.

NO.102 Cable plant loss should be estimated during the ______ phase.

NO.103 Information on the safety of chemicals used in fiber optics are __________.

NO.104 Structured cabling standards call for a maximum length of UTP cable for data of __________.

NO.105 Multiple Response: Identify one or more choices that best complete the statement or answer the question.
Which types of dispersion needs to be tested in long singlemode fiber links?

NO.106 A crimp-on connector like the Cat 5e/Cat 6 connector is also called a ________ connector.

NO.107 To maintain rated performance, twists in each pair must be maintained to within _______ of the termination.

NO.108 Which punchdown block is more often used with data (Cat 5e/6)?

NO.109 The largest contributor to fiber attenuation is __________.

NO.110 Multiple Response: Identify one or more choices that best complete the statement or answer the question.
Preparing cables for splicing in splice closures requires __________.

NO.111 Individual splice loss on concatenated cables can be verified by __________ .

NO.112 Which multimode insertion loss test reference method is required in industry standards?

NO.113 Outside plant cabling can be installed by __________.

NO.114 Until Gigabit Ethernet, LANs only used ______ pairs of the UTP cable.

NO.115 In singlemode connectors, __________ is as important as low loss.

NO.116 What is a passive optical network (PON)?

NO.117 Copper networks can be converted to fiber optics using __________.