350-501 Premium Exam Engine - Download Free PDF Questions [Q91-Q105]

Rate this post

350-501 Premium Exam Engine – Download Free PDF Questions

Instant Download 350-501 Free Updated Test Dumps

NO.91 Drag and drop the OSPF and IS-IS Cisco MPLS TE extensions from the left to their functional descriptions on the right.

NO.92 Drag and drop the functions from the left onto the correct Path Computation Element Protocol roles on the right

Explanation
Path Computation Element (Calculates paths through the network, keeps TE topology database information, sends path status updates) Path computation Client (sends path calculation request, sends path creation request) Path Computation Element (PCE) Represents a software module (which can be a component or application) that enables the router to compute paths applying a set of constraints between any pair of nodes within the router’s TE topology database. PCEs are discovered through IGP.
Path Computation Client (PCC)
Represents a software module running on a router that is capable of sending and receiving path computation requests and responses to and from PCEs. The PCC is typically an LSR (Label Switching Router).
https://www.cisco.com/c/en/us/td/docs/routers/crs/software/crs_r5-3/mpls/configuration/guide/b-mpls-cg53x-crs

NO.93 Refer to the exhibit.

Router R1 and its peer R2 reside on the same subnet in the network. If an engineer implements this configuration to R1. how does it make connections to R2?
this configuration to R1. how does it make connections to R2?

R1 establishes UDP connections mat are authenticated with an M05 password.

R1 establishes UDP connections mat are authenticated with a Gear-text password.

R1 establishes TCP connections mat are authenticated with an M05 password.

R1 establishes TCP connections that are authenticated with a dear-text password.

NO.94 Refer to the exhibit.

What reestablishes the OSPF neighbor relationship between Router 1 and Router 2?

authentication is added to the configuration

correct wildcard mask is used on Router 2

OSPF process IDs match

hello intervals match

NO.95 Refer to the exhibit. EIGRP is running between routers R5 and R1, and OSPF is used in the rest of the network. Users in a network attached to router R3 need to access a server connected to R5. Which task must the engineer perform so that only the users attached to R3 are able to access the server, but no other network is shared to OSPF?

Configure redistribution using route maps to filter the routes that are shared

Configure redistribution using an offset list to filter the routes that are shared.

Configure an OSPF virtual link between R1 and R3 to route traffic between the two areas.

Configure R1 as a stub router for EIGRP and OSPF so that only the default route is shared

NO.96 An engineer Is implementing NSR with OSPF on a large campus that requires high availability.
Which task must an engineer perform to complete the process with minimal disruption to traffic?

Reset OSPF neighbour sessions to maintain state Information during router switchover

Configure the device to repopulate state information using routing updates received from the BDR

increase the keepalive interval on the OSPF neighbours so that traffic continues to pass during the switchover.

Ensure that the dual HP has synchronized their state information before performing the switchover operation.

NO.97 How does SR policy operate in Segment Routing Traffic Engineering?

An SR policy for color and endpoint is deactivated at the headend as soon as the headend learns a valid candidate path for the policy.

When “invalidation drop” behavior occurs, the SR policy forwarding entry is removed and the router drops all traffic that is steered into the SR policy.

When a set of SID lists is associated with the SR policy designated path, traffic steering is ECMP- based according to the qualified cost of each SID-list.

An active SR policy installs a BSID-keyed entry in the forwarding table to steer the packets that match the entry to the SR policy SID-list.

NO.98 Refer to the exhibit.

An engineer implemented this configuration. What is the status of the neighbor relationship between R1 and R2?

The neighbor relationship is up because R2 is level i and level 2 router.

The neighbor relationship is down because the two routers are configured with different area types.

The neighbor relationship is down because the two routers are in the same subnet.

The neighbor relationship is down because R2 is operating as a Level 1 router and the two routers are in different areas.

NO.99 A network engineer deployed Cisco MPLS TE tunnels on the service provider network to steer the traffic over those tunnels to optimize the bandwidth utilization.
Which two configurations can send the traffic to the Cisco MPLS TE tunnel interfaces? (Choose two.)

applying the fast-reroute per-prefix command

static route pointing down to the Cisco MPLS TE interface tunnel

applying the autoroute announce command under the Cisco MPLS TE interface tunnel

enabling LFA calculation

applying an explicit-path command under the Cisco MPLS TE interface tunnel

NO.100 Refer to the exhibit:

If router RA is configured as shown, which IPv4 multicast address space does it use?

224.0. 0.0/8

225.0. 0.0/8

232.0. 0.0/8

239.0. 0.0/8

NO.101 An engineer is setting up overlapping VPNs to allow VRF ABC and XYZ to communicate with VRF CENTRAL but wants to make sure that VRF ABC and XYZ cannot communicate.
Which configuration accomplishes these objectives?

NO.102 Drag and Drop Question
Drag and drop the BGP Best Path Algorithm rules from the left into the corresponding order of importance on the right.

NO.103 Refer to the exhibit:

In which way does router R1 operate differently than router R2?

R1 sends LSA type 2 only, while R2 sends type 1 and type 7 LSAs

R1 sends LSA types 1 and 2, while R2 sends type 1. 2. and 7 LSAs

R1 sends LSA type 2 only and R2 sends LSA type 1 only

R1 sends LSA types 5 and 7, while R2 sends type 1, 2, and 7 LSAs

NO.104 An engineer is implementing a Cisco MPLS TE tunnel to improve the streaming experience for the clients of a video-on-demand server. Which action must the engineer perform to configure extended discovery to support the MPLS LDP session between the headend and tailend routers?

Configure a targeted neighbor session.

Configure an access list on the interface to permit TCP and UDP traffic.

Configure a Cisco MPLS TE tunnel on both ends of the session.

Configure the interface bandwidth to handle TCP and UDP traffic between the LDP peers.

https://community.cisco.com/t5/mpls/mpls-te-tunnel-targeted-ldp-session/td-p/2863558

NO.105 Why do packet loops occur during the configuration of BlDlR-PIM?

The network does not support BIDIR-PIM

The network is partially upgraded to support BIDlR-PIM

No interface for carrying traffic for multicast groups has been configured

The router has not been configured to advertise itself

Loading …

Cisco 350-501 exam is a 120-minute test that consists of 60-70 questions. It is a challenging exam that requires a deep understanding of the topics covered. 350-501 exam questions are designed to test your knowledge and skills in real-world scenarios, so it is important to have hands-on experience in implementing and operating Cisco Service Provider Network Core Technologies.

Free 350-501 Exam Braindumps Cisco Pratice Exam: https://www.dumpstorrent.com/350-501-exam-dumps-torrent.html

350-501 Premium Exam Engine – Download Free PDF Questions [Q91-Q105]

admin

Leave a Reply Cancel reply