Free Oct-2023 UPDATED Juniper JN0-104 Exam Questions & Answer [Q53-Q75]

Rate this post

Free Oct-2023 UPDATED Juniper JN0-104 Exam Questions & Answer

Latest Success Metrics For Actual JN0-104 Exam Realistic Dumps

Juniper JN0-104 (Junos, Associate (JNCIA-Junos)) Certification Exam is an entry-level certification for individuals who are interested in becoming a Juniper Networks Certified Associate. JN0-104 exam is designed to test the candidates’ knowledge and understanding of the Juniper operating system (OS) known as Junos. The Junos OS is a reliable and scalable network operating system that is widely used by organizations worldwide.

QUESTION 53
Which statement is correct about protocol families on an interface?

Only one family is allowed on an interface.

Only one address per family is allowed on an interface.

Only one address per family is allowed on a given logical unit.

Multiple families and addresses can be configured under the same logical unit.

QUESTION 54
By default, which Junos directory contains the primary syslog file?

/var/syslog

/var/home

/var/log

/var/tmp

QUESTION 55
What are two benefits of class of service (CoS)? (Choose two.)

CoS can increase the performance of a slow network.

CoS can manage traffic congestion

CoS can prioritize latency-sensitive traffic

CoS can increase network bandwidth.

QUESTION 56
Which of these are valid match criteria for a firewall filter applied to a Layer 3 interface? (Choose three)

Session ID

protocol

MAC address

port

IP address

QUESTION 57
Which two syslog files will be present in the configuration after factory-defaults have been loaded?

system and chassis

messages and interactive-commands

syslog-messages and NVRAM

authorization and events

QUESTION 58
Where are files queued for transmission when using the configuration archive transfer-on-commit function?

/var/config

/var/queue

/var/transfer/queue

/var/transfer/config

QUESTION 59
Which of these about transit traffic is true?

Traffic that enters an ingress port, is compared against the forwarding table and forwarded out an egress port.

Traffic that is addressed to the chassis, requires special handling by the RE before it can be forwarded out an egress port.

Traffic that requires special attention and does not pass through the device.

Traffic that generates an ICMP message.

QUESTION 60
What are two configurable physical interface properties? (Choose two.)

MTU

address

protocol family

link mode

QUESTION 61
Which of these configuration steps are needed to create and apply an export policy that advertises static routes to RIP neighbours? (Choose two)

edit policy-options policy-statement DEMO set term 1 from protocol static accept

user@host# show protocols rip group INTERNAL export ExportStatic;

user@host# show policy-options policy-statement ExportStatic { term exportstatic1 { from protocol static; then accept; } }

set protocols rip export DEMO

QUESTION 62
Which two features are implemented on the Packet Forwarding Engine? (Choose two.)

firewall filters

chassis management

class of service

routing protocol updates

QUESTION 63
Which two statements about the configure exclusive command are correct? (Choose two.)

The command excludes other users from editing the configuration.

The command retains all uncommitted changes when exiting exclusive mode

The command causes the loss of all uncommitted changes when exiting exclusive mode

The command allows multiple users to edit private copies of the configuration concurrently.

QUESTION 64
When using the monitor traffic command on Junos devices, what is the correct parameter to send the captured information to a file named traffic?

file-write traffic

write traffic

file traffic

write-file traffic

QUESTION 65
Which of these commands will provide the current configuration of the MX1-PE1 BGP group on your router? (Choose two)

user@router# show | display set | match MX1-PE1

user@router> show configuration | display set | match MX1-PE1

user@router> show configuration | match set | match MX1-PE1

user@router# show groups | display set | match MX1-PE1

QUESTION 66
What information is provided by the show route forwarding-table command?

the routing table stored on the RE

the protocol from where the route was learned

the outgoing interface(s) associated with the destination prefixes

the number of routes that are active, hidden, or in a hold-down state

QUESTION 67
Which of these is true about the Junos operating system?

Junos provides separation between control and forwarding planes.

All Juniper devices use the same Junos operating system.

The Junos source code is specific to the device model.

QUESTION 68
Referring to the exhibit, what is the expected behavior for login attempts from users that receive a reject form from both the RADIUS and TACACS+ servers?

Users are prompted for a local authentication password.

Users are not prompted for a local authentication password.

Users are prompted for the root authentication password.

Users are granted limited access to the device using a guest account.

Local Auth is not included in the authentication-order. It will only consult the local auth if it doesn’t recieved any reply from the RADIUS and TACAS from a certain time. In this case the RADIUS and TACAS rejects the Authentication therefore no need to consult the local auth.

QUESTION 69
Which of these commands will enable access to J-Web using HTTPS?

set system services web-management j-web-https

set service web-management remote-access

set system services web-management https

set services web-management https

QUESTION 70
Which of these routing information sources is preferred by default?

IS-IS level 2

OSPF internal

IS-IS level 1

OSPF external

QUESTION 71
Referring to the exhibit,

Which next-hop interface will be used to reach the 10.21.14.16 destination?

ge-0/0/1.0

ge-0/0/0.0

ge-0/0/3.0

ge-0/0/2.0

QUESTION 72
Which two statements are true regarding routing tables?

The routing table is populated by the forwarding table.

Devices running the Junos OS can accommodate multiple routing tables.

Information learned from routing protocols is stored in the routing table.

The primary routing table for IPv4 unicast routes is inet.4.

QUESTION 73
You have configure an SRX Series device for the first time. When you commit your configuration, the Junos OS notifies you that you cannot yet commit your configuration.
Which configuration step must
you complete?

security policies

hostname

date/time

root authentication

QUESTION 74
Which of these functions are available under the “Maintain” tab of J-Web? (Choose two)

reboot the device

view and add licenses

view real-time statistics of interfaces

edit security settings

QUESTION 75
Which configuration causes OSPF-learned routes to be advertised to other OSPF neighbors?

No configuration needed; it happens by default

top edit policy-options policy-statement demo set term 1 from protocol ospf set term 1 then accept top set protocols ospf export demo

set protocols ospf advertise in-out

top edit policy-options policy-statement demo set term 1 from active routes set term 1 then accept top set protocols ospf export demo

Loading …

Juniper JN0-104 certification exam is recognized worldwide and is highly valued by the employers. Junos, Associate (JNCIA-Junos) certification demonstrates the candidate’s knowledge and skills in Juniper networking technology and enhances their credibility in the job market. Junos, Associate (JNCIA-Junos) certification also opens up new job opportunities and career growth prospects for the candidates.

Updated JN0-104 Dumps Questions For Juniper Exam: https://www.dumpstorrent.com/JN0-104-exam-dumps-torrent.html

Free Oct-2023 UPDATED Juniper JN0-104 Exam Questions & Answer [Q53-Q75]

admin

Leave a Reply Cancel reply