Check Real EDGE EDGE-Expert Exam Question for Free (2025) [Q36-Q57]

NEW QUESTION 36
Ceiling fans are an efficient way to increase air movement and therefore thermal comfort. Which of the following forms part of the evidence to demonstrate compliance at the design stage?

Photographs of the installed ceiling fans

Computational Fluid Dynamics (CFD) assessment of all habitable spaces

Manufacturer’s data sheet of the ceiling fans

Purchase receipts of the ceiling fans

NEW QUESTION 37
Which type of evidence is required at the post-construction stage for the efficiency measure window glazing?

Design building elevations marking the window glass specifications

Bill of quantities with the specifications for the window glass highlighted

Manufacturer’s data sheets showing the make and model, U-value, and SHGC of the installed glass

Window schedule for the building showing the major window glass types if more than one type of glass is present

The post-construction stage in EDGE certification requires evidence to confirm that the efficiency measures claimed in the design stage have been implemented as specified. For window glazing, which affects energy efficiency through its U-value (thermal transmittance) and SHGC (Solar Heat Gain Coefficient), the EDGE Certification Protocol provides clear requirements: “At the post-construction stage, the Client must provide manufacturer’s data sheets for the window glazing measure, showing the make and model, U-value, and SHGC of the installed glass, to confirm that the glazing matches the specifications claimed in the self- assessment and meets the energy efficiency requirements” (EDGE Certification Protocol, Section 3.4: Post- Construction Requirements). Option C, manufacturer’s data sheets showing the make and model, U-value, and SHGC of the installed glass, directly matches this requirement, as it provides the specific technical data needed to verify compliance. Option A (design building elevations marking the window glass specifications) is relevant at the design stage, not post-construction: “Design elevations are required at the preliminary stage to show intended glazing specifications, not after construction” (EDGE Certification Protocol, Section 3.2:
Audit Requirements). Option B (bill of quantities with specifications highlighted) is insufficient on its own, as it may not provide detailed technical data: “Bills of quantities may support purchase verification, but manufacturer’s data sheets are required for technical specifications like U-value and SHGC” (EDGE Certification Protocol, Section 3.4: Post-Construction Requirements). Option D (window schedule showing major glass types) is helpful but not sufficient, as it lacks the detailed technical data: “Window schedules may indicate glass types, but they do not replace the need for manufacturer’s data sheets with U-value and SHGC at post-construction” (EDGE User Guide, Section 6.2: Documentation Requirements). The EDGE User Guide further clarifies: “For glazing measures, post-construction evidence must confirm the installed product’s performance through manufacturer’s data sheets, ensuring alignment with the design-stage claims” (EDGE User Guide, Section 4.1: Insulation Measures). Thus, manufacturer’s data sheets (Option C) are required at the post-construction stage.
Reference:EDGE Certification Protocol, Section 3.4: Post-Construction Requirements, Section 3.2: Audit Requirements; EDGE User Guide Version 2.1, Section 6.2: Documentation Requirements, Section 4.1:
Insulation Measures.

NEW QUESTION 38
An EDGE Auditor is auditing a hospital design for Preliminary Certification. The EDGE Client has included photovoltaics as one of the energy measures resulting in an overall 21% saving in energy. The Auditor observes the photovoltaics are facing the wrong direction. What action should the Auditor take?

Contact the design team directly and suggest a better orientation for the photovoltaics.

Adjust the area of photovoltaic panels in the assessment to allow for reduction in energy output.

Assess the energy measures as they are presented to you, without changing the photovoltaic selection.

Reject photovoltaics from the selected set of energy measures and notify the Client regarding the orientation.

NEW QUESTION 39
Which of the following heating systems uses Coefficient of Performance (COP) as a measure of efficiency in the EDGE software?

Electric heater

Condensing boiler

Ground source heat pump

Sensible heat recovery from exhaust air

NEW QUESTION 40
Which of the following is an EDGE measure to reduce the embodied energy in materials?

External shading

Fly ash concrete

Occupancy sensors

Low-flow shower heads

Embodied energy in materials is one of the three core pillars of the EDGE standard, focusing on reducing the environmental impact of construction materials. The EDGE User Guide lists measures that specifically target embodied energy: “To reduce embodied energy in materials, EDGE includes measures such as the use of fly ash concrete, which substitutes a portion of cement with fly ash, a byproduct of coal combustion, thereby lowering the embodied energy and carbon footprint of concrete production” (EDGE User Guide, Section 7.2:
Materials Efficiency Measures). Option B, fly ash concrete, directly aligns with this measure, as it reduces the need for high-energy cement production. Option A (external shading) impacts energy by reducing cooling loads but does not directly address embodied energy: “External shading reduces operational energy use but does not contribute to embodied energy savings unless the shading materials themselves are low-impact, which is not specified in EDGE” (EDGE User Guide, Section 3.5: Passive Design Strategies). Option C (occupancy sensors) is an energy efficiency measure for lighting, not materials: “Occupancy sensors reduce lighting energy use but have no direct impact on embodied energy in materials” (EDGE User Guide, Section
4.4: Lighting Efficiency Measures). Option D (low-flow shower heads) targets water efficiency, not materials:
“Low-flow shower heads reduce water consumption, but their embodied energy impact is minimal and not a focus of EDGE materials measures” (EDGE User Guide, Section 5.2: Water Efficiency Measures). The EDGE MethodologyReport further elaborates: “Fly ash concrete can reduce embodied energy by up to 20% compared to traditional concrete, making it a key measure in EDGE for materials efficiency, especially in high-volume applications like hospitals or hotels” (EDGE Methodology Report Version 2.0, Section 6.1:
Embodied Energy in Materials). Other materials measures in EDGE, such as using recycled steel or bamboo, are not listed among the options, making fly ash concrete (Option B) the correct choice for reducing embodied energy.
Reference:EDGE User Guide Version 2.1, Section 7.2: Materials Efficiency Measures, Section 3.5: Passive Design Strategies, Section 4.4: Lighting Efficiency Measures, Section 5.2: Water Efficiency Measures; EDGE Methodology Report Version 2.0, Section 6.1: Embodied Energy in Materials.

NEW QUESTION 41
What does the EDGE Auditor provide in the EDGE certification process for a project they are auditing?

Building design services

Approval of the building design

Recommendation for certification

Recommendation of materials and building systems

NEW QUESTION 42
What is the minimum percentage of efficient lightbulbs that must be installed to claim the measure EEM22 – Efficient Lighting for Internal Areas?

70%

80%

90%

100%

NEW QUESTION 43
Which of the following BEST describes an EDGE Expert?

A consultant who can issue a preliminary EDGE certificate

An individual accredited by the EDGE Certifier who can serve as a consultant

An individual who can serve as both an auditor and a consultant upon EDGE Committee approval

An individual accredited by the EDGE Operations and Management Team who can serve as a consultant

The role of an EDGE Expert is well-defined within the EDGE framework to clarify their responsibilities and qualifications. The EDGE Expert and Auditor Protocols provide a precise description: “An EDGE Expert is an individual accredited by the EDGE Certifier (such as GBCI or other authorized certification bodies) who can serve as a consultant to project teams, advising on the selection of green building measures, preparing the self-assessment in the EDGE software, and guiding the project toward certification” (EDGE Expert and Auditor Protocols, Section 2.1: Roles of EDGE Expert). Option B, an individual accredited by the EDGE Certifier who can serve as a consultant, directly matches this definition. Option A (a consultant who can issue a preliminary EDGE certificate) is incorrect, as Experts do not issue certificates: “Only the EDGE Certification Provider can issue a preliminary certificate, not the EDGE Expert” (EDGE Certification Protocol, Section 3.3: Certification Decision). Option C (an individual who can serve as both an auditor and a consultant upon EDGE Committee approval) is also incorrect, as this violates conflict-of-interest rules: “An individual cannot serve as both an EDGE Expert and Auditor on the same project, even with committee approval, to avoid conflicts of interest” (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). Option D (an individual accredited by the EDGE Operations and Management Team) is wrong, as accreditation is handled by the Certifier, not the Operations team: “The EDGE Operations and Management Team oversees the program, while accreditation of Experts is managed by the EDGE Certifier” (EDGE Certification Protocol, Section 1.3: Program Structure). The EDGE User Guide further supports this: “EDGE Experts are accredited professionals who consult on projects, having passed the EDGE Expert exam administered through the Certifier” (EDGE User Guide, Section 6.4: Working with EDGE Experts). Thus, Option B best describes an EDGE Expert.
Reference:EDGE Expert and Auditor Protocols, Section 2.1: Roles of EDGE Expert, Section 2.3: Conflict of Interest; EDGE Certification Protocol, Section 3.3: Certification Decision, Section 1.3: Program Structure; EDGE User Guide Version 2.1, Section 6.4: Working with EDGE Experts.

NEW QUESTION 44
Is it possible to be both the EDGE Expert and Auditor on a project?

No, an EDGE Expert cannot be the EDGE Auditor on the same project.

No, even if EDGE Certifier agrees to special terms to have no conflict of interest.

Yes, they can be both an EDGE Auditor and EDGE Expert in all cases.

Yes, but only in the case that there are no other EDGE Auditors available for the project.

The EDGE framework strictly enforces separation of roles to maintain integrity and avoid conflicts of interest during the certification process. The EDGE Expert and Auditor Protocols explicitly address this issue: “An individual cannot serve as both the EDGE Expert and EDGE Auditor on the same project. This separation ensures independence in the audit process, as the Expert’s role as a consultant advising the project team could bias the Auditor’s objective assessment of the project’s compliance with EDGE standards” (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). Option A, no, an EDGE Expert cannot be the EDGE Auditor on the same project, directly reflects this rule. Option B (no, even if the Certifier agrees to special terms) adds an unnecessary condition, as the protocols do not allow exceptions: “No exceptions are permitted for an individualto serve in both roles on the same project, regardless of agreements or special terms” (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). Option C (yes, in all cases) is incorrect, as it contradicts the conflict-of-interest rules: “Allowing dual roles in all cases would undermine the impartiality required for certification” (EDGE Certification Protocol, Section 3.1: Certification Process). Option D (yes, if no other Auditors are available) is also incorrect, as availability does not override the conflict-of-interest prohibition: “Even if no other Auditors are available, the roles must remain separate; the Client must find a different Auditor or delay the audit” (EDGE Expert and Auditor Protocols, Section 4.1: Audit Process). The EDGE User Guide reinforces this principle: “The separation of Expert and Auditor roles ensures a fair and unbiased certification process, protecting the credibility of EDGE certification” (EDGE User Guide, Section
6.4: Working with EDGE Experts). Thus, it is not possible to be both (Option A).
Reference:EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest, Section 4.1: Audit Process; EDGE Certification Protocol, Section 3.1: Certification Process; EDGE User Guide Version 2.1, Section 6.4:
Working with EDGE Experts.

NEW QUESTION 45
Which of the following passive design features is considered within the EDGE calculation methodology?

Lighting controls

External shading

Renewable energy

Efficient cooling system

NEW QUESTION 46
A hotel developer is planning a project. The specifications are based on corporate design standards for water fittings, lighting, heating, and air-conditioning. The EDGE Base Case will:

Not be suitable for certification of this project.

Be adapted to accommodate corporate specifications.

Use the local typical building practices or code.

Be verified on a case-by-case basis for the hotel chain.

NEW QUESTION 47
A site audit must take place within how many months of the project’s practical completion date?

12 months

18 months

24 months

36 months

The timeline for conducting a site audit as part of the EDGE certification process is critical to ensure that the project’s implementation aligns with the design-stage claims. The EDGE Certification Protocol specifies the timeframe for post-construction audits: “A site audit for EDGE certification must take place within 12 months of the project’s practical completion date to verify that the green building measures have been implemented as claimed in the self-assessment. This ensures that the audit reflects the building’s as-built condition while the project details are still current” (EDGE Certification Protocol, Section 3.4: Post-Construction Requirements).
Option A, 12 months, directly matches this requirement. Option B (18 months), Option C (24 months), and Option D (36 months) exceed the specified timeframe, which could lead to discrepancies due to changes in the building’s condition or operation: “Conducting the site audit beyond 12 months may result in inaccuracies, as building systems or occupancy patterns may change, affecting the verification of measures” (EDGE Expert and Auditor Protocols, Section 4.4: Site Audit Procedures). The EDGE User Guide also supports this timeline: “To maintain the integrity of the certification process, the site audit should be scheduled within 12 months of practical completion, allowing the Auditor to assess the building in its initial operational state” (EDGE User Guide, Section 6.3: Post-Construction Certification). The 12-month limit ensures that the audit is timely and relevant, making Option A the correct answer. Additionally, the EDGE Certification Protocol notes: “Extensions beyond 12 months may be granted only in exceptional circumstances, subject toapproval by the Certification Provider, but this is not the standard requirement” (EDGE Certification Protocol, Section
3.4: Post-Construction Requirements). Since the question asks for the standard timeframe, 12 months (Option A) applies.
Reference:EDGE Certification Protocol, Section 3.4: Post-Construction Requirements; EDGE Expert and Auditor Protocols, Section 4.4: Site Audit Procedures; EDGE User Guide Version 2.1, Section 6.3: Post- Construction Certification.

NEW QUESTION 48
Who is responsible for paying the EDGE certification fees?

EDGE Expert

EDGE Client

EDGE Operations and Management Team

Local Green Building Council

The EDGE certification process involves various fees, including registration and certification fees, and assigns clear responsibility for their payment. The EDGE Certification Protocol explicitly states: “The EDGE Client, typically the project owner or developer, is responsible for paying the EDGE certification fees, which include the registration fee to enter the project into the system and the certification fee upon successful completion of the audit process. These fees are paid to the EDGE Certification Provider to cover the costs of certification” (EDGE Certification Protocol, Section 2.1: Registration). Option B, EDGE Client, directly aligns with this responsibility, as the Client is the party seeking certification and thus bears the financial obligation. Option A (EDGE Expert) is incorrect, as the Expert provides consultancy services and is typically paid by the Client, not responsible for certification fees: “The EDGE Expert may assist with the certification process, but the Client is responsible for all fees associated with registration and certification” (EDGE Expert and Auditor Protocols, Section 2.1: Roles of EDGE Expert). Option C (EDGE Operations and Management Team) is also incorrect, as this team oversees the EDGE program, not individual project fees: “The EDGE Operations and Management Team manages the program at a global level and does not handle or pay project- specific certification fees” (EDGE Certification Protocol, Section 1.3: Program Structure). Option D (Local Green Building Council) may act as a Certification Provider in some regions, but they receive the fees, not pay them: “Local Green Building Councils, such as those partnered with GBCI, may serve as Certification Providers, but the payment of fees is the responsibility of the Client, not the Council” (EDGE User Guide, Section 6.1: Project Preparation). The EDGE User Guide further reinforces: “The Client must budget for andpay all EDGE certification fees, ensuring timely payment to the Certification Provider to avoid delays in the certification process” (EDGE User Guide, Section 6.1: Project Preparation). The EDGE Certification Protocol adds: “Certification fees are typically invoiced by the Certification Provider, such as GBCI, and must be settled by the Client to receive the final EDGE certificate” (EDGE Certification Protocol, Section 3.3:
Certification Decision). Thus, the EDGE Client (Option B) is responsible for paying the certification fees.
Reference:EDGE Certification Protocol, Section 2.1: Registration, Section 1.3: Program Structure, Section
3.3: Certification Decision; EDGE Expert and Auditor Protocols, Section 2.1: Roles of EDGE Expert; EDGE User Guide Version 2.1, Section 6.1: Project Preparation.

NEW QUESTION 49
In EDGE software, occupancy sensors are used for controlling:

Lighting.

Water taps.

Air conditioners.

External lighting.

Occupancy sensors in the EDGE software are part of energy efficiency measures aimed at reducing unnecessary energy use by automating system operation based on occupant presence. The EDGE User Guide explicitly defines their application: “Occupancy sensors in EDGE are used for controlling lighting in internal areas, automatically turning lights off when spaces are unoccupied to reduce energy consumption. This measure, often listed as EEM23 – Occupancy Sensors for Lighting, can achieve significant savings in buildings with intermittent occupancy, such as offices or schools” (EDGE User Guide, Section 4.4: Lighting Efficiency Measures). Option A, lighting, directly matches this description, as occupancy sensors are primarily associated with lighting control in EDGE. Option B (water taps) is incorrect, as occupancy sensors are not used for water systems in EDGE: “Water taps may be controlled by sensors in some projects, but this is not a recognized measure in EDGE, which focuses on measures like low-flow fixtures for water savings” (EDGE User Guide, Section 5.2: Water Efficiency Measures). Option C (air conditioners) is also incorrect, as occupancy sensors for HVAC are not a standard measure in EDGE: “While occupancy sensors can theoretically control air conditioners, EDGE does not include this as a measure; HVACefficiency is addressed through measures like variable speed drives or efficient chillers” (EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics). Option D (external lighting) is not applicable, as EDGE specifies occupancy sensors for internal areas: “Occupancy sensors in EDGE are applied to internal lighting, not external lighting, which may use timers or photocells instead” (EDGE User Guide, Section 4.4: Lighting Efficiency Measures). The EDGE Methodology Report further confirms: “The energy savings from occupancy sensors in EDGE are calculated based on reduced lighting hours in internal spaces, reflecting typical usage patterns in commercial buildings” (EDGE Methodology Report Version 2.0, Section 5.4:
Lighting Calculations). Thus, occupancy sensors are used for controlling lighting (Option A).
Reference:EDGE User Guide Version 2.1, Section 4.4: Lighting Efficiency Measures, Section 5.2: Water Efficiency Measures; EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics, Section 5.4: Lighting Calculations.

NEW QUESTION 50
An EDGE Auditor has been requested to provide auditing services to a development client. This particular client is well known as a hard negotiator and has offered the appointment on the basis of50% payment for assessment and 50% upon successful EDGE certification of the building. What should the EDGE Auditor do?

Confirm a fixed fee independent of the final assessment result.

Lodge a complaint against the developer with the local authorities.

Refer the developer to another Auditor in the area who needs the work.

Accept these terms, knowing that the project will most likely achieve certification.

EDGE Auditors must adhere to strict ethical guidelines to maintain independence and avoid conflicts of interest, particularly regarding payment structures that could influence their impartiality. The EDGE Expert and Auditor Protocols address payment terms explicitly: “An EDGE Auditor must confirm a fixed fee for their services that is independent of the final assessment result. Payment structures that tie fees to the success of certification, such as contingent payments, are prohibited to ensure the Auditor’s objectivity and to prevent any perception of bias in the audit process” (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). The client’s offer of 50% payment for assessment and 50% upon successful certification violates this principle, as it makes part of the fee contingent on the outcome. Option A, confirm a fixed fee independent of the final assessment result, aligns with this ethical requirement, ensuring the Auditor’s impartiality. Option B (lodge a complaint with local authorities) is incorrect, as this is an overreaction and outside the Auditor’s role: “Issues related to payment terms should be resolved directly with the Client, not escalated to local authorities, which are unrelated to EDGE certification” (EDGE Expert and Auditor Protocols, Section 4.1: Audit Process). Option C (refer the developer to another Auditor) avoids the issue but does not address the ethical concern: “Referring the Client to another Auditor does not resolve the ethical violation of contingent fees, which applies to all Auditors” (EDGE Expert and Auditor Protocols, Section 2.3:
Conflict of Interest). Option D (accept the terms) is unethical, as it compromises the Auditor’s independence:
“Accepting payment terms tied to certification success, even if the project is likely to succeed, violates EDGE protocols and undermines the integrity of the certification process” (EDGE Certification Protocol, Section 3.1:
Certification Process). The EDGE User Guide further emphasizes: “Auditors must maintain strict independence, ensuring their compensation is not influenced by the certification outcome, to uphold the credibility of EDGE certification” (EDGE User Guide, Section 6.5: Working with EDGE Auditors). Thus, the Auditor should confirm a fixed fee (Option A).
Reference:EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest, Section 4.1: Audit Process; EDGE Certification Protocol, Section 3.1: Certification Process; EDGE User Guide Version 2.1, Section 6.5:
Working with EDGE Auditors.

NEW QUESTION 51
Air-cooled chillers have the following components:

Cooling tower, condenser, condenser pump, evaporator.

Compressor, condenser, thermal expansion valve, evaporator.

Chilled water pump, condenser, thermal expansion valve, evaporator.

Compressor, water-cooled condenser, thermal expansion valve, evaporator.

NEW QUESTION 52
In the EDGE software, what is the unit of the embodied carbon of the material?

kgCO2

MJ

BTU

kWh

Embodied carbon in EDGE refers to the carbon emissions associated with the production, transportation, and installation of building materials, a key metric for materials efficiency. The EDGE User Guide specifies how this is measured: “In the EDGE software, the embodied carbon of materials is quantified in kilograms of carbon dioxide equivalent (kgCO2), reflecting the total greenhouse gas emissions associated with the material’ s lifecycle, from extraction to installation”(EDGE User Guide, Section 7.2: Materials Efficiency Measures).
Option A, kgCO2, directly matches this unit, as EDGE uses kgCO2 to standardize carbon emissions across materials, allowing for comparison and aggregation in the software’s results. Option B (MJ) is incorrect, as MJ (megajoules) measures embodied energy, not carbon: “Embodied energy in EDGE is measured in MJ, representing the energy consumed in material production, while embodied carbon is separately calculated in kgCO2 to assess environmental impact” (EDGE Methodology Report Version 2.0, Section 6.1: Embodied Energy in Materials). Option C (BTU) is also incorrect, as BTU (British Thermal Units) is an energy unit not used in EDGE for carbon calculations: “EDGE uses metric units like MJ for energy and kgCO2 for carbon; BTU is not a standard unit in the software” (EDGE User Guide, Section 2.3: Using the EDGE App). Option D (kWh) is another energy unit, typically used for operational energy, not embodied carbon: “kWh is used in EDGE to measure operational energy consumption, such as electricity use, but not for embodied carbon, which is always in kgCO2” (EDGE Methodology Report Version 2.0, Section 5.2: Energy Calculation Methods). The EDGE User Guide further clarifies: “The software displays embodied carbon in kgCO2 to align with global carbon accounting standards, enabling users to understand the environmental footprint of their material choices” (EDGE User Guide, Section 7.2: Materials Efficiency Measures). The EDGE Methodology Report adds: “For example, concrete might have an embodied carbon of 0.15 kgCO2 per kg, allowing users to compare materials like fly ash concrete versus standard concrete in terms of carbon impact” (EDGE Methodology Report Version 2.0, Section 6.1: Embodied Energy in Materials). Thus, the unit of embodied carbon in EDGE is kgCO2 (Option A).
Reference:EDGE User Guide Version 2.1, Section 7.2: Materials Efficiency Measures, Section 2.3: Using the EDGE App; EDGE Methodology Report Version 2.0, Section 6.1: Embodied Energy in Materials, Section
5.2: Energy Calculation Methods.

NEW QUESTION 53
As an EDGE Auditor, one requires a full set of documentation to support each green building measure selected in a project assessment. Providing this information is the responsibility of:

The Client.

The Facility Manager.

The Building Inspector.

The project design team.

The roles and responsibilities in the EDGE certification process are clearly defined to ensure a streamlined audit process. The EDGE Certification Protocol explicitly assigns the responsibility for providing documentation to support green building measures: “The EDGE Client is responsible for providing a full set of documentation to support each green building measure selected in the project assessment. This includes drawings, specifications, manufacturer’s data sheets, and any other evidence required by the Auditor to verify compliance with the EDGE standard during both the design and post-construction stages” (EDGE Certification Protocol, Section 3.1: Certification Process). Option A, the Client, directly aligns with this requirement, as the Client (typically the project owner or developer) is the primary party submitting the project for certification and must provide all necessary evidence. Option B (the Facility Manager) is incorrect because the Facility Manager’s role is operational, not related to certification documentation: “Facility Managers may assist with operational data for EDGE Zero Carbon certification but are not responsible for providing design or construction documentation” (EDGE Certification Protocol, Section 2.3: Certification Levels). Option C (the Building Inspector) is also incorrect, as this role is external to the EDGE process and not involved in certification: “Building Inspectors ensure compliance with local codes, not EDGE requirements” (EDGE User Guide, Glossary). Option D (the project design team) may prepare documentation, but the responsibility lies with the Client to submit it: “While the design team often prepares technical documents, it is the Client’s responsibility to compile and provide them to the Auditor as part of the certification process” (EDGE Expert and Auditor Protocols, Section 2.1: Roles of EDGE Client). The EDGE User Guide further reinforces this by stating: “The Client must ensure all supporting documentation is complete and accessible to the Auditor to avoid delays in the certification process” (EDGE User Guide, Section 6.2: Documentation Requirements). Therefore, the Client (Option A) is responsible for providing the full set of documentation for the audit.
Reference:EDGE Certification Protocol, Section 3.1: Certification Process, Section 2.3: Certification Levels; EDGE Expert and Auditor Protocols, Section 2.1: Roles of EDGE Client; EDGE User Guide Version 2.1, Section 6.2: Documentation Requirements, Glossary.

NEW QUESTION 54
Coefficient of Performance (COP) of the electrical chiller is defined as:

Thermal output / thermal input.

Thermal output / electrical input.

Electrical input / thermal output.

Electrical output / electrical input.

NEW QUESTION 55
A medium-rise building comprises retail on the first two floors with offices on succeeding floors (third to fifth). If one of the tenants on the third floor aims for EDGE certification, which building type should be used?

Office

Retail

Mixed-use

Core and Shell

The EDGE software requires users to select a building type (typology) to model resource consumption accurately, and the choice depends on the scope of the certification. In this scenario, a tenant on the third floor (an office floor) of a medium-rise building seeks EDGE certification. The EDGE User Guide provides guidance on selecting building types for tenant spaces: “When a tenant within a larger building seeks EDGE certification, the building type should reflect the tenant’s space. For an office tenant on the third floor of a mixed-use building, the ‘Office’ typology should be selected, as the certification applies only to the tenant’s space, not the entire building, unless the whole building is being certified” (EDGE User Guide, Section 2.2:
Project Setup). Option A, Office, aligns with this guidance, as the tenant’s space is an office. Option B (Retail) is incorrect, as the retail floors are on the first two levels, not the third: “Retail typology would apply if the tenant space were on the retail floors, not the office floors” (EDGE User Guide, Section 2.2: Project Setup). Option C (Mixed-use) is also incorrect, as this typology applies to the entire building, not a single tenant space: “Mixed-use typology is used when the entire building, including all uses (e.g., retail and offices), is being certified, not for individual tenant spaces” (EDGE Methodology Report Version 2.0, Section
2.1: Calculation Approach). Option D (Core and Shell) is typically used for buildings certified up to the core and shell stage, not for tenant fit-outs: “Core and Shell typology applies to buildings certified without tenant fit-outs, focusing on the building envelope and systems, not individual tenant spaces like an office” (EDGE Certification Protocol, Section 1.2: Scope of EDGE Standard). The EDGE User Guide further clarifies: “For tenant-led certifications, the typology should match the tenant’s use-e.g., ‘Office’ for an office tenant-even if the building has multiple uses, ensuring the Base Case reflects the tenant’s specific consumption patterns” (EDGE User Guide, Section 2.2: Project Setup). Since the tenant on the third floor operates an office, the Office typology (Option A) is the correct choice for EDGE certification.
Reference:EDGE User Guide Version 2.1, Section 2.2: Project Setup; EDGE Methodology Report Version
2.0, Section 2.1: Calculation Approach; EDGE Certification Protocol, Section 1.2: Scope of EDGE Standard.

NEW QUESTION 56
EDGE was created for new buildings to promote:

Revenue for green building champions.

Few exemplary high-performance buildings.

Simple and scalable platform for green buildings.

Highly accurate prediction of resource consumption.

NEW QUESTION 57
Within the EDGE methodology, recycled water or rainwater harvested on site is deducted from the building’s Improved Case water consumption and is reported as:

Water usage

Water savings

Wastewater

Potable water

Check Real EDGE EDGE-Expert Exam Question for Free (2025) [Q36-Q57]

admin

Leave a Reply Cancel reply