EDGE EDGE-Expert Exam Dumps – PDF Questions and Testing Engine [Q11-Q28]

At the design stage (Preliminary Certification), EDGE requires specific documentation to verify that proposed measures, such as ceiling fans, will be implemented as claimed. The EDGE Certification Protocol specifies:
“For measures like ceiling fans at the design stage, the Client must provide evidence such as manufacturer’s data sheets that detail the make, model, and specifications (e.g., power rating, air movement capacity) to confirm the fans meet the efficiency criteria for improving thermal comfort” (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option C, manufacturer’s data sheet of the ceiling fans, aligns with this requirement, as it provides the necessary specifications for verification. Option A (photographs of installed ceiling fans) is relevant at the post-construction stage, not design: “Photographs are required at the post- construction stage to confirm installation, not at the design stage” (EDGE Certification Protocol, Section 3.4:
Post-Construction Requirements). Option B (CFD assessment) is not required, as EDGE uses simplified calculations: “EDGE does not require CFD assessments for air movement; fan specifications suffice for design-stage verification” (EDGE Methodology Report Version 2.0, Section 5.5: Thermal Comfort Measures). Option D (purchase receipts) is also a post-construction requirement: “Purchase receipts verify installation, not design intent” (EDGE Certification Protocol, Section 3.4: Post-Construction Requirements).
Thus, the manufacturer’s data sheet (Option C) is the correct evidence at the design stage.
Reference:EDGE Certification Protocol, Section 3.2: Audit Requirements, Section 3.4: Post-Construction Requirements; EDGE Methodology Report Version 2.0, Section 5.5: Thermal Comfort Measures.

The EDGE App relies on location-specific climate data to calculate resource savings, but not all cities are listed. The EDGE User Guide provides guidance for such cases: “If the project city is not listed in the EDGE App, the user should choose the closest city to the project location that is available in the database. If necessary, the user can edit the climate data (e.g., temperature, humidity) to better reflect the project’s actual conditions, ensuring accurate calculations” (EDGE User Guide, Section 2.2: Project Setup). Option B, choose the closest city and edit the climate data if necessary, directly matches this protocol. Option A (write to EDGE Certifier and wait) is incorrect, as this is not a required step: “Users are not required to request new cities; they can proceed by selecting the closest city” (EDGE User Guide, Section 2.2: Project Setup). Option C(select any city in the same climate zone globally) is too broad and inaccurate: “Choosing a city from a different region, even in the same climate zone, may lead to incorrect assumptions about local practices and climate” (EDGE Methodology Report Version 2.0, Section 3.2: Climate Data Inputs). Option D (choose the capital city) is also incorrect unless it is the closest: “The capital city should only be selected if it is the nearest available option in the database” (EDGE User Guide, Section 2.2: Project Setup). Thus, the correct protocol is to choose the closest city and edit climate data (Option B).
Reference:EDGE User Guide Version 2.1, Section 2.2: Project Setup; EDGE Methodology Report Version
2.0, Section 3.2: Climate Data Inputs.

The issuance of certificates in the EDGE certification process is a defined responsibility assigned to specific roles. The EDGE Certification Protocol states: “The EDGE Preliminary Certificate, awarded at the design stage, is issued by the EDGE Certification Provider after the Auditor submits a recommendation for certification based on the design audit. The Certification Provider reviews the Auditor’s report and, if compliant, issues the certificate” (EDGE Certification Protocol, Section 3.3: Certification Decision). Option C, Certification Provider, aligns with this process, as entities like GBCI are responsible for issuing certificates. Option A (Auditor) is incorrect, as Auditors only recommend certification: “The Auditor’s role is to provide a recommendation, not to issue the certificate” (EDGE Expert and Auditor Protocols, Section 2.2:
Roles of EDGE Auditor). Option B (Expert) is also incorrect, as Experts advise on design, not certification:
“EDGE Experts assist with project design and self-assessment, not certification issuance” (EDGE Expert and Auditor Protocols, Section 2.1: Roles of EDGE Expert). Option D (Operations and Management Team) is wrong, as this team supports the overall program, not individual certifications: “The EDGE Operations and Management Team oversees program development, not certificate issuance” (EDGE Certification Protocol, Section 1.3: Program Structure). Thus, the Preliminary Certificate is issued by the Certification Provider (Option C).
Reference:EDGE Certification Protocol, Section 3.3: Certification Decision, Section 1.3: Program Structure; EDGE Expert and Auditor Protocols, Section 2.1: Roles of EDGE Expert, Section 2.2: Roles of EDGE Auditor.

EDGE Zero Carbon certification requires specific prerequisites and operational data to verify performance.
The EDGE Certification Protocol details the requirements: “To apply for EDGE Zero Carbon certification, a project must first achieve EDGE Advanced certification, which requires at least 40% energy savings.
Additionally, EDGE Zero Carbon certification mandates at least one year of operational data at 75% occupancy to confirm energy performance, after which carbon offsets can be purchased for the remaining energy use to achieve zero carbon status” (EDGE Certification Protocol, Section 2.3: Certification Levels). In this scenario, the building’s energy savings have increased to 60% with solar panels, qualifying it for EDGE Advanced (40% minimum). The next step is to gather one year of operational data before applying for EDGE Zero Carbon, making Option C (after achieving EDGE Advanced certification and gathering one year of operational data) correct. Option A (as soon as one year of operational data) skips the EDGE Advanced requirement: “EDGE Advanced is a prerequisite for EDGE Zero Carbon” (EDGE Certification Protocol, Section 2.3: Certification Levels). Option B (no wait time) is incorrect, as operational data is mandatory:
“Operational data is required to verify performance for Zero Carbon certification” (EDGE User Guide, Section 6.3: Advanced Certifications). Option D (at the same time as EDGE Advanced and after two years) is wrong, as only one year of data is needed: “One year of operational data at 75% occupancy is sufficient for EDGE Zero Carbon” (EDGE Certification Protocol, Section 2.3: Certification Levels). Thus, Option C is the correct timeline.
Reference:EDGE Certification Protocol, Section 2.3: Certification Levels; EDGE User Guide Version 2.1, Section 6.3: Advanced Certifications.

Pool covers are a water and energy efficiency measure in EDGE, particularly relevant for hotels with swimming pools. The EDGE User Guide outlines their benefits: “Pool covers reduce water demand by minimizing evaporation and energy demand by reducing the need for heating, as they retain heat in the pool.
In EDGE, the use of pool covers is recognized for its dual impact on reducing both water and energy consumption” (EDGE User Guide, Section 5.3: Additional Water Efficiency Measures). Option B, reduce both water and energy demand, directly aligns with this description. Option A (increase solar control and comfort) is incorrect, as pool covers are not recognized in EDGE for solar control or occupant comfort but for resource savings. Option C (require less maintenance and work from employees) and Option D (reduce chemical consumption and that of cleaning products) are potential secondary benefits but are not quantified or recognized in EDGE calculations, as confirmed by: “EDGE focuses on measurable water and energy savings from pool covers, not on maintenance or chemical use reductions” (EDGE Methodology Report Version 2.0, Section 4.3: Water Efficiency Calculations). Thus, Option B is the correct answer.
Reference: EDGE User Guide Version 2.1, Section 5.3: Additional Water Efficiency Measures; EDGE Methodology Report Version 2.0, Section 4.3: Water Efficiency Calculations.

The EDGE App Results Bar displays key outputs of the software analysis after a project is modeled. The EDGE User Guide details the contents of the Results Bar: “The EDGE App Results Bar provides a summary of the project’s performance, including percentage savings in energy, water, and embodied energy in materials, as well as the incremental cost, payback period, and carbon emissions reduction” (EDGE User Guide, Section 2.4: Interpreting EDGE Results). Option C, incremental cost, is explicitly mentioned as part of the Results Bar, representing the additional cost of implementing green measures. Option A (building type) and Option B (occupant use) are inputs specified by the user during project setup, not outputs in the Results Bar, as noted: “Building type and occupant use are input parameters, not displayed in the Results Bar” (EDGE User Guide, Section 2.2: Project Setup). Option D (climate conditions) is also an input parameter (selected via location), not an output: “Climate conditions are derived from the selected location and are not shown in the Results Bar” (EDGE Methodology Report Version 2.0, Section 3.2: Climate Data Inputs). Thus, incremental cost (Option C) is the correct parameter found in the Results Bar.
Reference: EDGE User Guide Version 2.1, Section 2.4: Interpreting EDGE Results, Section 2.2: Project Setup; EDGE Methodology Report Version 2.0, Section 3.2: Climate Data Inputs.

The EDGE software uses a Base Case to establish a benchmark for resource consumption, tailored to local conditions. The EDGE Methodology Report explains how the Base Case is constructed: “The Base Case for external wall materials in hotels is determined using data from market surveys of typical building practices in the project’s country, supplemented by national building performance codes where available. This ensures the baseline reflects local construction norms and regulatory standards” (EDGE Methodology Report Version 2.0, Section 3.1: Base Case Determination). Option A matches this description by referencing typical building practices and national codes. Option B incorrectly refers to global practices and international codes, which EDGE does not use, as the software prioritizes local context. Option C, focusing on corporate specifications, is not part of the Base Case methodology, as the Base Case is standardized, not project-specific. Option D, involving local suppliers or accreditation, is irrelevant to how EDGE determines the Base Case, which relies on broader market data rather than supplier-specificinformation.
Reference:EDGE Methodology Report Version 2.0, Section 3.1: Base Case Determination; EDGE User Guide Version 2.1, Section 2.3: Using the EDGE App.

The EDGE software estimates water use in homes by considering elements that contribute to potable water demand, focusing on indoor and occupant-related usage. The EDGE User Guide details the elements included in water use calculations: “In EDGE, water use in homes is estimated based on occupant activities, including water for showers, faucets, toilets, laundry, and water heating, which accounts for hot water demand in these applications. These elements are modeled using standard usage assumptions for residential buildings” (EDGE User Guide, Section 5.2: Water Efficiency Measures). Option B, water heating, is explicitly included, as it represents the hot water demand for showers, faucets, and laundry, which is a significant component of residential water use. Option A (HVAC) is incorrect, as HVAC systems primarily consume energy, not water, except in specific cases like cooling towers, which are not typical in homes: “HVAC systems in homes, such as air conditioners, do not directly contribute to water use in EDGE calculations, unlike in commercial buildings with cooling towers” (EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations). Option C (exterior fountains) is also excluded, as EDGE focuses on indoor water use: “Exterior water use, such as for fountains or irrigation, is not typically included in EDGE’s water use estimates for homes, unless specifically modeled as an optional measure, which fountains are not” (EDGE User Guide, Section 5.3: Additional Water Efficiency Measures). Option D (solar water heaters) is a measure to reduce energy use for water heating, not an element of water use itself: “Solar water heaters reduce the energy demand for water heating but do not change the volume of water used, which is what EDGE estimates for water use in homes” (EDGE User Guide, Section 4.2: Energy Efficiency Measures). The EDGE Methodology Report further specifies: “Water use in homes is calculated based on per-capita assumptions for activities like showering, flushing, and water heating, ensuring a standardized baseline for savings calculations” (EDGE Methodology Report Version 2.0, Section 4.2: Water Savings Calculations). Thus, water heating (Option B) is the element considered in EDGE to estimate water use in homes.
Reference:EDGE User Guide Version 2.1, Section 5.2: Water Efficiency Measures, Section 5.3: Additional Water Efficiency Measures, Section 4.2: Energy Efficiency Measures; EDGE Methodology Report Version
2.0, Section 4.2: Water Savings Calculations.

The EDGE certification process involves various fees, including registration and certification fees, and assigns clear responsibility for their payment. The EDGE Certification Protocol explicitly states: “The EDGE Client, typically the project owner or developer, is responsible for paying the EDGE certification fees, which include the registration fee to enter the project into the system and the certification fee upon successful completion of the audit process. These fees are paid to the EDGE Certification Provider to cover the costs of certification” (EDGE Certification Protocol, Section 2.1: Registration). Option B, EDGE Client, directly aligns with this responsibility, as the Client is the party seeking certification and thus bears the financial obligation. Option A (EDGE Expert) is incorrect, as the Expert provides consultancy services and is typically paid by the Client, not responsible for certification fees: “The EDGE Expert may assist with the certification process, but the Client is responsible for all fees associated with registration and certification” (EDGE Expert and Auditor Protocols, Section 2.1: Roles of EDGE Expert). Option C (EDGE Operations and Management Team) is also incorrect, as this team oversees the EDGE program, not individual project fees: “The EDGE Operations and Management Team manages the program at a global level and does not handle or pay project- specific certification fees” (EDGE Certification Protocol, Section 1.3: Program Structure). Option D (Local Green Building Council) may act as a Certification Provider in some regions, but they receive the fees, not pay them: “Local Green Building Councils, such as those partnered with GBCI, may serve as Certification Providers, but the payment of fees is the responsibility of the Client, not the Council” (EDGE User Guide, Section 6.1: Project Preparation). The EDGE User Guide further reinforces: “The Client must budget for andpay all EDGE certification fees, ensuring timely payment to the Certification Provider to avoid delays in the certification process” (EDGE User Guide, Section 6.1: Project Preparation). The EDGE Certification Protocol adds: “Certification fees are typically invoiced by the Certification Provider, such as GBCI, and must be settled by the Client to receive the final EDGE certificate” (EDGE Certification Protocol, Section 3.3:
Certification Decision). Thus, the EDGE Client (Option B) is responsible for paying the certification fees.
Reference:EDGE Certification Protocol, Section 2.1: Registration, Section 1.3: Program Structure, Section
3.3: Certification Decision; EDGE Expert and Auditor Protocols, Section 2.1: Roles of EDGE Expert; EDGE User Guide Version 2.1, Section 6.1: Project Preparation.

The role of an EDGE Auditor during a design audit (Preliminary Certification stage) is to verify compliance with the EDGE standard, which requires at least 20% savings in energy, water, and embodied energy in materials. If the project does not meet the standard, the Auditor must follow specific protocols without overstepping their role. The EDGE Expert and Auditor Protocols outline the acceptable actions: “If a project does not meet the EDGE standard for energy during a design audit, the Auditor should inform the Client of the shortfall and ask them to use the EDGE tool again to identify additional measures that will take the project comfortably over the EDGE standard (e.g., 20% energy savings). The Auditor must not provide design advice or modify the assessment themselves, as their role is to verify, not consult” (EDGE Expert and Auditor Protocols, Section 4.1: Audit Process). Option A, ask the Client to use the EDGE tool again to identify options that will take the project comfortably over the EDGE standard, directly aligns with this guidance, as it keeps the Auditor in a verification role while encouraging the Client to revise their design. Option B (contact the design team directly to work with them) is incorrect, as it violates the Auditor’s independence: “The Auditor must not engage directly with the design team to improve the project, as this constitutes consultancy, which conflicts with their role as an independent verifier” (EDGE Expert and Auditor Protocols, Section 2.3:
Conflict of Interest). Option C (take no further action) is also incorrect, as the Auditor has a responsibility to report the shortfall: “If a project does not meet the EDGE standard, the Auditor must document the failure in the audit report and inform the Client, rather than abandoning the process” (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option D (provide a list of measures based on the Auditor’s experience) oversteps the Auditor’s role by offering consultancy: “The Auditor cannot provide specific design recommendations or measures, as this compromises their impartiality; they must direct the Client to use the EDGE software or consult an EDGE Expert” (EDGE Expert and Auditor Protocols, Section 2.3: Conflict of Interest). The EDGE User Guide further supports: “During a design audit, the Auditor’s role is to assess compliance, not to guide the design process; if the project falls short, the Client should revisit the EDGE tool to explore additional measures, potentially with the help of an EDGE Expert” (EDGE User Guide, Section
6.5: Working with EDGE Auditors). The EDGE Certification Protocol adds: “The Auditor’s report should note the energy shortfall and recommend that the Client revise the self-assessment to meet the 20% savings threshold, ensuring the process remains Client-driven” (EDGE Certification Protocol, Section 3.2: Audit Requirements). Thus, asking the Client to use the EDGE tool again (Option A) is the acceptable course of action.
Reference:EDGE Expert and Auditor Protocols, Section 4.1: Audit Process, Section 2.3: Conflict of Interest; EDGE Certification Protocol, Section 3.2: Audit Requirements; EDGE User Guide Version 2.1, Section 6.5:
Working with EDGE Auditors.

The preliminary certification stage requires specific documentation to verify the implementation of efficiency measures like Insulation for Cold Storage Envelope. The EDGE Certification Protocol outlines the evidence requirements: “For measures involving insulation, such as Insulation for Cold Storage Envelope, the Client must provide drawings at the preliminary certification stage that specify the U-value of the installed insulation to demonstrate compliance with the measure’s requirements. The U-value must be lower than the Base Case to qualify for savings” (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option C, drawings showing the U-value specification of the cold storage envelope, directly aligns with this requirement. Option A (calculations of Coefficient of Performance) is irrelevant, as COP applies to HVAC systems, not insulation:
“COP is used for chillers, not insulation measures” (EDGE User Guide, Section 4.2: Energy Efficiency Measures). Option B (manufacturer’s data sheets for the HVAC system) is also unrelated, as the measure focuses on the envelope, not HVAC: “HVAC documentation is not required for insulation measures” (EDGE Certification Protocol, Section 3.2: Audit Requirements). Option D (purchase receipts showing the U-value) is more relevant at the post-construction stage: “Purchase receipts are typically required at the post-construction stage to confirm installation, while drawings suffice for design-stage verification” (EDGE Certification Protocol, Section 3.4: Post-Construction Requirements). Thus, drawings with U-value specifications (Option C) are required at preliminary certification.
Reference:EDGE Certification Protocol, Section 3.2: Audit Requirements, Section 3.4: Post-Construction Requirements; EDGE User Guide Version 2.1, Section 4.2: Energy Efficiency Measures.

In EDGE, the Coefficient of Performance (COP) is used to measure the efficiency of heating systems that produce heat using a refrigeration cycle, such as heat pumps. The EDGE Methodology Report specifies: “The Coefficient of Performance (COP) is used in EDGE to evaluate the efficiency of heat pumps, including ground source heat pumps, where it is defined as the ratio of thermal output to electrical input. This metric is not applied to direct heating systems like electric heaters or boilers” (EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics). Option C, ground source heat pump, fits this description as it operates using a refrigeration cycle to transfer heat, and its efficiency is measured by COP in EDGE. Option A (electric heater) has an efficiency typically measured as 100% (or COP of 1), but EDGE does not use COP for such systems, as noted: “Electric heaters are assumed to have a fixed efficiency in EDGE, not evaluated via COP” (EDGE User Guide, Section 4.2: Energy Efficiency Measures). Option B (condensing boiler) uses thermal efficiency (%), not COP, as per: “Boilers in EDGE are assessed by their thermal efficiency, not COP” (EDGE Methodology Report Version 2.0, Section 5.2: Heating Systems). Option D (sensible heat recovery from exhaust air) is a heat recovery method, not a heating system, and does not use COP: “Heat recovery systems are evaluated by their heat recovery effectiveness, not COP” (EDGE User Guide, Section 4.3:
Ventilation Measures). Thus, ground source heat pump (Option C) is the correct choice.
Reference: EDGE Methodology Report Version 2.0, Section 5.1: Energy Efficiency Metrics, Section 5.2:
Heating Systems; EDGE User Guide Version 2.1, Section 4.2: Energy Efficiency Measures, Section 4.3:
Ventilation Measures.

Embodied carbon in EDGE refers to the carbon emissions associated with the production, transportation, and installation of building materials, a key metric for materials efficiency. The EDGE User Guide specifies how this is measured: “In the EDGE software, the embodied carbon of materials is quantified in kilograms of carbon dioxide equivalent (kgCO2), reflecting the total greenhouse gas emissions associated with the material’ s lifecycle, from extraction to installation”(EDGE User Guide, Section 7.2: Materials Efficiency Measures).
Option A, kgCO2, directly matches this unit, as EDGE uses kgCO2 to standardize carbon emissions across materials, allowing for comparison and aggregation in the software’s results. Option B (MJ) is incorrect, as MJ (megajoules) measures embodied energy, not carbon: “Embodied energy in EDGE is measured in MJ, representing the energy consumed in material production, while embodied carbon is separately calculated in kgCO2 to assess environmental impact” (EDGE Methodology Report Version 2.0, Section 6.1: Embodied Energy in Materials). Option C (BTU) is also incorrect, as BTU (British Thermal Units) is an energy unit not used in EDGE for carbon calculations: “EDGE uses metric units like MJ for energy and kgCO2 for carbon; BTU is not a standard unit in the software” (EDGE User Guide, Section 2.3: Using the EDGE App). Option D (kWh) is another energy unit, typically used for operational energy, not embodied carbon: “kWh is used in EDGE to measure operational energy consumption, such as electricity use, but not for embodied carbon, which is always in kgCO2” (EDGE Methodology Report Version 2.0, Section 5.2: Energy Calculation Methods). The EDGE User Guide further clarifies: “The software displays embodied carbon in kgCO2 to align with global carbon accounting standards, enabling users to understand the environmental footprint of their material choices” (EDGE User Guide, Section 7.2: Materials Efficiency Measures). The EDGE Methodology Report adds: “For example, concrete might have an embodied carbon of 0.15 kgCO2 per kg, allowing users to compare materials like fly ash concrete versus standard concrete in terms of carbon impact” (EDGE Methodology Report Version 2.0, Section 6.1: Embodied Energy in Materials). Thus, the unit of embodied carbon in EDGE is kgCO2 (Option A).
Reference:EDGE User Guide Version 2.1, Section 7.2: Materials Efficiency Measures, Section 2.3: Using the EDGE App; EDGE Methodology Report Version 2.0, Section 6.1: Embodied Energy in Materials, Section
5.2: Energy Calculation Methods.

The roles and responsibilities in the EDGE certification process are clearly defined to ensure a streamlined audit process. The EDGE Certification Protocol explicitly assigns the responsibility for providing documentation to support green building measures: “The EDGE Client is responsible for providing a full set of documentation to support each green building measure selected in the project assessment. This includes drawings, specifications, manufacturer’s data sheets, and any other evidence required by the Auditor to verify compliance with the EDGE standard during both the design and post-construction stages” (EDGE Certification Protocol, Section 3.1: Certification Process). Option A, the Client, directly aligns with this requirement, as the Client (typically the project owner or developer) is the primary party submitting the project for certification and must provide all necessary evidence. Option B (the Facility Manager) is incorrect because the Facility Manager’s role is operational, not related to certification documentation: “Facility Managers may assist with operational data for EDGE Zero Carbon certification but are not responsible for providing design or construction documentation” (EDGE Certification Protocol, Section 2.3: Certification Levels). Option C (the Building Inspector) is also incorrect, as this role is external to the EDGE process and not involved in certification: “Building Inspectors ensure compliance with local codes, not EDGE requirements” (EDGE User Guide, Glossary). Option D (the project design team) may prepare documentation, but the responsibility lies with the Client to submit it: “While the design team often prepares technical documents, it is the Client’s responsibility to compile and provide them to the Auditor as part of the certification process” (EDGE Expert and Auditor Protocols, Section 2.1: Roles of EDGE Client). The EDGE User Guide further reinforces this by stating: “The Client must ensure all supporting documentation is complete and accessible to the Auditor to avoid delays in the certification process” (EDGE User Guide, Section 6.2: Documentation Requirements). Therefore, the Client (Option A) is responsible for providing the full set of documentation for the audit.
Reference:EDGE Certification Protocol, Section 3.1: Certification Process, Section 2.3: Certification Levels; EDGE Expert and Auditor Protocols, Section 2.1: Roles of EDGE Client; EDGE User Guide Version 2.1, Section 6.2: Documentation Requirements, Glossary.

The EDGE audit process requires that the documentation submitted by the Client accurately reflects the self- assessment in the EDGE software, ensuring consistency and transparency. The EDGE Expert and Auditor Protocols address discrepancies in documentation: “If an EDGE Auditor identifies a discrepancy between the submitted documentation and the self-assessment PDF, such as measures being claimed that were not selected in the EDGE software, the Auditor must inform the Client to update the EDGE software to reflect the correct measures and prepare a new PDF for submission. This ensures that the audit is based on an accurate representation of the project’s claims” (EDGE Expert and Auditor Protocols, Section 4.2: Evidence Verification). Option C, inform the Client to update the EDGE software and prepare a new PDF, directly aligns with this protocol, as it corrects the error at the source and ensures the self-assessment matches the claimed measures. Option A (ask for advice from the EDGE Partner) is unnecessary, as the protocol provides clear guidance: “Auditors are expected to follow standard procedures for discrepancies without needing to consult the EDGE Partner, unless the issue involves a policy interpretation beyond the protocols” (EDGE Expert and Auditor Protocols, Section 4.1: Audit Process). Option B (modify the self-assessment and submit) is unethical and prohibited, as Auditors cannot alter the Client’s submission: “The Auditor must not modify the Client’s self-assessment in the EDGE software, as this compromises the independence of the audit process; the Client is responsible for updating the assessment” (EDGE Certification Protocol, Section 3.2:
Audit Requirements). Option D (ignore the error on PDF) is also incorrect, as ignoring discrepancies violates audit integrity: “All discrepancies between the PDF and submitted documents must be resolved before the audit proceeds, as ignoring errors could lead to incorrect certification outcomes” (EDGE Expert and Auditor Protocols, Section 4.2: Evidence Verification). The EDGE User Guide further reinforces: “The self- assessment PDF must accurately reflect the measures selected in the EDGE software, and any mismatch requires the Client to revise the assessment to ensure a fair and transparent audit” (EDGE User Guide, Section
6.2: Documentation Requirements). Thus, the Auditor should inform the Client to update the software and prepare a new PDF (Option C).
Reference:EDGE Expert and Auditor Protocols, Section 4.2: Evidence Verification, Section 4.1: Audit Process; EDGE Certification Protocol, Section 3.2: Audit Requirements; EDGE User Guide Version 2.1, Section 6.2: Documentation Requirements.

During a site visit for post-construction certification, the EDGE Auditor relies on specific tools to verify compliance. The EDGE Expert and Auditor Protocols specify: “The primary resource for an EDGE Auditor during a site visit is the EDGE Auditor’s checklist, which provides a structured list of items to verify, including the implementation of selected measures, alignment with the self-assessment, and compliance with EDGE standards” (EDGE Expert and Auditor Protocols, Section 4.4: Site Audit Procedures). Option C, EDGE Auditor’s checklist, matches this description as the key resource guiding the audit process. Option A (EDGE software) is a tool for assessment, not a resource for the site visit: “The EDGE software is used for self-assessment and desk audits, not directly during site visits” (EDGE Certification Protocol, Section 3.2:
Audit Requirements). Option B (roof insulation U-value) and Option D (Window to Wall Ratio) are specific data points the Auditor may verify, not primary resources: “U-values and WWR are elements to check, not tools for the Auditor” (EDGE Expert and Auditor Protocols, Section 4.4: Site Audit Procedures). The checklist ensures all aspects of the project are systematically reviewed, making it the primary resource (Option C).
Reference:EDGE Expert and Auditor Protocols, Section 4.4: Site Audit Procedures; EDGE Certification Protocol, Section 3.2: Audit Requirements.

The EDGE methodology is designed to calculate resource savings using standardized inputs that reflect the building’s context and design, rather than actual operational data. The EDGE Methodology Report outlines the factors used: “The EDGE methodology is based on climatic conditions of the location, building type and occupant use, and design and specifications. Climatic conditions determine heating and cooling loads, building type and occupant use define usage patterns (e.g., residential vs. hotel), and design and specifications include details like insulation levels, glazing properties, and system efficiencies” (EDGE Methodology Report Version 2.0, Section 2.1: Calculation Approach). Option A (climatic conditions of location), Option B (building type and occupant use), and Option C (design and specifications) are all integral to the methodology. However, Option D (electricity and water bills) is not a factor in EDGE calculations, as the methodology uses predictive modeling, not actual consumption data: “EDGE does not base its calculations on electricity and water bills, as these reflect operational performance rather than design potential. Instead, EDGE uses standardized assumptions about energy and water use based on building type, location, and design inputs” (EDGE User Guide, Section 2.1: EDGE Software Overview). The EDGE Methodology Report further clarifies: “Actual utility bills are not used in EDGE, as the software focuses on predicted savings at the design stage, not post-occupancy performance, except in cases like EDGE Zero Carbon certification where operational data is required” (EDGE Methodology Report Version 2.0, Section 2.2: Data Inputs). Since this question pertains to the general EDGE methodology (not Zero Carbon), electricity and water bills are not a factor. The EDGE User Guide also states: “The methodology relies on theoretical models to estimate resource use, ensuring consistency across projects, rather than variable operational data like utility bills” (EDGE User Guide, Section 2.3: Using the EDGE App). Thus, electricity and water bills (Option D) are not part of the EDGE methodology.
Reference:EDGE Methodology Report Version 2.0, Section 2.1: Calculation Approach, Section 2.2: Data Inputs; EDGE User Guide Version 2.1, Section 2.1: EDGE Software Overview, Section 2.3: Using the EDGE App.

EDGE Zero Carbon certification, like all EDGE certifications, is limited to specific building typologies supported by the EDGE software, as these typologies have predefined usage patterns for accurate modeling.
The EDGE User Guide lists the supported typologies: “EDGE certification, including EDGE Zero Carbon, is available for the following building typologies: homes, hotels, offices, hospitals, retail, schools, warehouses, and light industry buildings. Museums are not a supported typology in EDGE, as their unique usage patterns, such as specialized HVAC for artifact preservation, are not modeled in the software” (EDGE User Guide, Section 1.2: Scope of EDGE Certification). Option C, the project cannot be certified because EDGE does not have a ‘museum’ typology, directly aligns with this limitation, as museums are not among the supported building types. Option A (the project team can select any typology they consider applicable) is incorrect, as EDGE requires the use of predefined typologies: “The EDGE software restricts typology selection to predefined categories to ensure accurate Base Case calculations; users cannot create custom typologies for unsupported building types like museums” (EDGE Methodology Report Version 2.0, Section 2.1: Calculation Approach). Option B (operating for at least 6 months at 75% occupancy) and Option D (operating for at least
12 months at 75% occupancy) address operational data requirements for EDGE Zero Carbon, but they are irrelevant if the typology is unsupported: “EDGE Zero Carbon certification requires at least 12 months of operational data at 75% occupancy to verify performance, but this applies only to supported typologies” (EDGE Certification Protocol, Section 2.3: Certification Levels). Since museums are not supported, the operational data requirement does not apply, making both B and D incorrect in this context. The EDGE Certification Protocol further confirms: “Buildings like museums, which are not part of EDGE’s typology list, cannot be certified, as the software cannot generate a Base Case for unsupported building types, ensuring consistency in certification standards” (EDGE Certification Protocol, Section 1.2: Scope of EDGE Standard).
The EDGE User Guide adds: “Clients pursuing certification for unsupported typologies, such as museums or cultural centers, will need to explore other green building certifications, as EDGE is not designed for these building types” (EDGE User Guide, Section 1.2: Scope of EDGE Certification). Thus, the project cannot be certified due to the lack of a museum typology (Option C).
Reference:EDGE User Guide Version 2.1, Section 1.2: Scope of EDGE Certification; EDGE Certification Protocol, Section 1.2: Scope of EDGE Standard, Section 2.3: Certification Levels; EDGE Methodology Report Version 2.0, Section 2.1: Calculation Approach.